Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Before using for the first time
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior and accessories
- Cleaning the front of the appliance and the side panels
- Cleaning the ventilation gaps
- Cleaning the door seal
- Cleaning the compressor and metal grille at the back of the appliance
- Starting up the appliance after cleaning
- Problem solving guide
- Noises
- Service
- Installation
Selecting further settings
27
Activating or deactivating the
The lock function can be activated to
prevent the appliance being switched
off by mistake.
– To activate the lock
Press the Super freeze button for
approx. 5seconds.
The menu symbol lights up. Settings
mode is now active. The lock symbol
flashes.
Press the Super freeze button
briefly to access the lock function.
The lock symbol lights up. The fields
for -15°C and -21°C light up in the
temperature display.
Press the Super freeze button
briefly to activate the lock.
The lock symbol flashes. The fields
for -15°C and -21°C in the temperat-
ure display go out. The lock symbol
will light up.
To quit settings mode press the On/
Off button.
or
wait 5minutes.
The menu symbol goes out and the
temperature display shows the required
temperature. The lock symbol lights
up.
– To deactivate the lock
Press the Super freeze button for
approx. 5seconds.
The menu symbol lights up. Settings
mode is now active. The lock symbol
flashes.
Press the Super freeze button
briefly to access the lock function.
The lock symbol will light up and the
-18 °C field will light up in the temperat-
ure display.
Press the Super freeze button
briefly to deactivate the lock.
The lock symbol flashes. The -18°C
field in the temperature display will go
out.
To quit settings mode press the On/
Off button.
or
wait 5minutes.
The menu symbol goes out and the
temperature display shows the required
temperature. The lock symbol goes
out.