Operating instructions/Installation instructions

Installation
*INSTALLATION*
50
Aligning the appliance
 To align the appliance, adjust the
front feet using the spanner supplied
Installing the refrigeration appliance
in a run of kitchen units
 Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the com-
pressor will run more frequently and
for longer periods. This will result in
increased energy consumption and a
higher operating temperature for the
compressor. This may, in turn, cause
damage to the compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
Top box
Refrigeration appliance
Housing unit
Wall
* The appliance depth is increased by
approx. 35mm for refrigeration appli-
ances with wall spacers fitted.
The refrigeration appliance can be built
into any run of kitchen units and in-
stalled directly next to a kitchen fur-
niture housing unit. The appliance front
must protrude in front of furniture fronts
by at least 34mm at the sides and by at
least 55mm in the middle. This enables
the appliance door to be opened and
shut without being obstructed. To
match the height of the rest of the kit-
chen units, the refrigeration appliance
can be fitted with a suitable top box.
When installed next to a wall, a dis-
tance of at least 55mm must be main-
tained on the hinge side between the
wall and the refrigeration appli-