Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Before using for the first time
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior and accessories
- Cleaning the front of the appliance and the side panels
- Cleaning the ventilation gaps
- Cleaning the door seal
- Cleaning the compressor and metal grille at the back of the appliance
- Starting up the appliance after cleaning
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
53
Changing the door hinging
The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed.
Danger of injury and damage
when changing the door hinging.
There is an increased danger of in-
jury and damage if the refrigeration
appliance is installed by a single per-
son.
Always change the door hinging with
the help of a second person.
If the door seal is damaged or has
slipped out of its groove, the appli-
ance door may not close properly
and cooling performance will be re-
duced. Condensate will build up in
the interior cabinet and this can
cause a build-up of ice.
Do not damage the door seal and
ensure it does not slip out of its
groove.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
- the spanner supplied
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.