Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Before using for the first time
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the interior and accessories
- Cleaning the front of the appliance and the side panels
- Cleaning the ventilation gaps
- Cleaning the door seal
- Cleaning the compressor and metal grille at the back of the appliance
- Starting up the appliance after cleaning
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
54
Remove the door handle
Open the appliance door.
Pull door handle. The sidebar
will then slide back.
Pull sidebar firmly to the back out
of the guides on the mounting plate.
Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
Remove the cover caps from the op-
posite side, and fit them into the
empty holes.
Removing the appliance door
Danger of injury when removing
the upper door.
The appliance door is not secure
once the hinge pin has been re-
moved.
The appliance door must be held by
a second person.
Carefully tip the appliance back with
the help of a second person, and un-
screw the safety screw from the
right-hand lower hinge plate.
Open the appliance door.
Hold the appliance door on the
handle side and at the bottom, and
carefully lift it off. Hinge pin with
washer will be released from hinge
plate.
If it does not release itself:
Press hinge pin together with
washer out of the hinge plate from
underneath.