Operating instructions/Installation instructions

Switching on and off
19
Before using for the first time
Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The appliance is covered with a special
foil to protect it during transportation.
 Do not remove the foil until the appli-
ance has been positioned in its final
location.
Cleaning and care
Please refer to the relevant instruc-
tions in “Cleaning and care”.
 Clean the inside of the appliance and
the accessories.
Connecting the appliance
 Connect the appliance to the electri-
city supply as described in “Electrical
connection”.
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
 Touch the On/Off sensor until the
temperature display lights up.
If the word DEMO appears in the dis-
play, demo mode is active. Please call
Miele Service.
The appliance will start cooling.
If the temperature inside the appliance
is above 0°C, bars will flash in the dis-
play.
The alarm symbol  will also flash in
the display, until the temperature has
dropped sufficiently low in the freezer.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature in the display.
Switching off
 Touch the On/Off sensor.
The temperature display will go out.