Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Maximum freezing capacity
- Freezing fresh food
- Storing frozen food
- Home freezing
- Hints on home freezing
- Packaging food for freezing
- Before placing food in the appliance
- Placing frozen food in the freezer
- – Freezing small amounts of food
- – Freezing the maximum amount of food (see data plate)
- _
- Removing the drawers and glass shelves
- Freezer tray
- Storage time for frozen food
- Defrosting frozen goods
- Cooling drinks quickly
- Using accessories
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Problem solving guide
44
Message Cause and remedy
The power failure sym-
bol appears in the
display.
The temperature display
will also show the
warmest temperature
recorded in the freezer
during the interruption
to the power supply or
power cut.
The temperature in the appliance in the previous
days or hours has risen too high because of a power
cut or interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
Touch the sensor for switching off the temperature
alarm.
The warmest temperature display will go out. The
display will then revert to showing the actual temper-
ature in the freezer.
Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if it is, use it as soon as
possible. Defrosted food may only be re-frozen
after it has been cooked.
“F0toF9” appears in
the display.
There is a fault.
Call the Miele Service Department.