Operating instructions/Installation instructions

Installation
*INSTALLATION*
55
Changing the door hinging
The refrigeration appliance is supplied
with left-hand hinging. If right-hand
hinging is required, the hinges can be
changed.
Do not change the hinging if this refri-
geration appliance is going to be in-
stalled side-by-side with another refri-
geration appliance.
 Danger of injury and damage
when changing the door hinging.
There is an increased danger of in-
jury and damage if the refrigeration
appliance is installed by a single per-
son.
Always change the door hinging with
the help of a second person.
If the door seal is damaged or has
slipped out of its groove, the appli-
ance door may not close properly
and cooling performance will be re-
duced. Condensate will build up in
the interior cabinet and this can
cause a build-up of ice.
Do not damage the door seal and
ensure it does not slip out of its
groove.
Preparation
To change the door hinging, you will
need the following tools:
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Removing the top covers
 Close the appliance door.
 Remove cover by sliding it for-
wards from the back and then lifting it
off.
 Remove cover by pulling it up-
wards.
 Danger of injury when removing
the appliance door.
The appliance door is not secure
once the hinge plate has been re-
moved.
The door must be held by a second
person.