Operating instructions/Installation instructions

Table Of Contents
Installation
*INSTALLATION*
56
Removing the door
Loosen screws in hinge plate
and pull it upwards and off.
Carefully lift appliance door off and
place carefully to one side.
Changing the handle over
Take stoppers out of the door
bearings in the appliance door.
Remove stopper from the top of
the door and refit it on the opposite
side of the door.
Remove covers from handle,
then unscrew the handle and refit all
these parts on the opposite side of
the door.
Take care when refitting covers
that they click into position correctly.
Refit stoppers on the opposite side
of the door.
To change over the spring clamp
press down on the catch and pull the
spring clamp forwards: