Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature and door alarm
- Selecting further settings
- Freezing and storing food
- Maximum freezing capacity
- Freezing fresh food
- Storing frozen food
- Home freezing
- Hints on home freezing
- Packaging food for freezing
- Before placing food in the appliance
- Placing frozen food in the freezer
- – Freezing small amounts of food
- – Freezing the maximum amount of food (see data plate)
- _
- Removing the drawers and glass shelves
- Freezer tray
- Storage time for frozen food
- Defrosting frozen goods
- Cooling drinks quickly
- Using accessories
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
57
Changing the lower hinge plate over
Pull hinge pin complete with
washer and adjusting foot up-
wards to remove.
Remove stopper.
Undo the screws and remove the
hinge plate .
Loosen the screw for the door closing
aid in hinge plate . Refit the door
closing aid in the hole on the other
side of the hinge plate and then
tighten the screw up again.
Insert stopper into the other hole.
Remove cover .
Take screw out and screw it into
the outside hole on the opposite side.
Turn cover through 180° and refit it
on the opposite side.
Screw hinge plate securely into
position on the new hinge side.
Refit the entire hinge pin , including
the washer and adjustable foot .
Important! The tab on the hinge pin
must still face downwards.
Place door onto the hinge pin from
above.
Close the appliance door.
Inserting the upper hinge plate
Fit hinge plate on the opposite
side and secure it with screws. If
necessary drill pilot holes for the
screws or use a battery operated
screwdriver.