Operating instructions/Installation instructions

Cleaning and care
37
 Clean the condensate channel and
drain hole frequently so that con-
densate can drain away unhindered.
Use a straw or similar to clear the
drain if necessary.
 Leave the door open to air the appli-
ance for a short while and to prevent
odours building up.
Cleaning the front of the appli-
ance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discolouration or
damage.
Therefore it is best to remove soiling
from the appliance door and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the surfaces.
See "Cleaning agents" at the begin-
ning of this section.
 The surfaces should be cleaned using
a solution of hot water and a little
washing-up liquid applied with a soft
sponge. They can also be cleaned
with a damp microfibre cloth (without
using any cleaning agent).
 After cleaning, wipe with clean water
and dry with a soft cloth.
Stainless steel appliances
The appliance front has a high quality,
special finish (CleanSteel) which is res-
istant to soiling and is very easy to
clean.
 Do not use stainless steel
cleaning agent on CleanSteel sur-
faces. It will damage them.
Do not use Miele stainless steel
conditioning agent on these sur-
faces. This will cause noticeable
smearing.