Operating instructions/Installation instructions

Changing the door hinging
58
 To change over the spring clamp 
press down on the catch and pull the
spring clamp forwards:
Changing the lower hinge plate
over
 Pull hinge pin complete with
washer  and adjusting foot  up-
wards to remove.
 Remove stopper.
 Undo the screws  and remove the
hinge plate .
 Loosen the screw for the door closing
aid  in hinge plate . Refit the door
closing aid  in the hole on the other
side of the hinge plate and then
tighten the screw up again.
 Insert stopper into the other hole.
 Remove cover .
 Take screw out and screw it into
the outside hole on the opposite side.
 Turn cover through 180° and refit it
on the opposite side.
 Screw hinge plate  securely into
position on the new hinge side.
 Refit the entire hinge pin , including
the washer  and adjustable foot .
Important! The tab on the hinge pin
must still face downwards.
 Place door onto the hinge pin from
above.
 Close the appliance door.