Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. G M.-Nr.
Contents Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Appliance overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Caring for the environment . . . . . .
Contents Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 For testing institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Optional accessories . . . .
Description of the appliance Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dispenser e Air inlet for drying (depending on model) k Salt reservoir f Lower spray arm 5
Description of the appliance Control panel a Check/Refill indicators d On button g with indicator light b Programmes e Off button o c Programme selector button This instruction book applies to several different dishwasher models.
Warning and Safety instructions Delivery This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance. Keep these instructions in a safe place for future reference, and pass them on to any future user.
Warning and Safety instructions The dishwasher must not be installed under a hob. The high radiant temperatures which are sometimes generated by a hob could damage the dishwasher. For the same reason it should not be installed next to open fires or other appliances which give off heat, such as heaters etc. If you want to convert your freestanding dishwasher to a built-under ("U") model, you will need to order the appropriate conversion kit.
Warning and Safety instructions Avoid leaving the door open unnecessarily, as you could trip over it. Do not sit or lean on the opened door. This could cause the dishwasher to tip and be damaged and you could get injured. Only use detergent and rinse aid formulated for domestic dishwashers. Do not use washing-up liquid. In an appliance with a cutlery basket (depending on model) cutlery is cleaned and dried more efficiently if placed in the basket with the handles downwards.
Warning and Safety instructions To avoid damage to the appliance and other materials Do not fill the rinse aid reservoir with powder or liquid detergent. This will cause serious damage to the reservoir. Inadvertently filling the salt reservoir with powder or liquid dishwasher detergent always leads to serious damage to the water softener.
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure that they are recycled.
Before using for the first time To open the door To close the door ^ Push the baskets right in. ^ Then lift the door upwards and push until it clicks into position. ^ Pull the handle. If the door is opened during operation all functions are automatically interrupted.
Before using for the first time Water softener In order to achieve good cleaning results, the dishwasher needs to operate with soft water. Hard water results in the build-up of calcium deposits on crockery and in the dishwasher. Mains water with a hardness level higher than 0.7 mmol/l (4 °d - German scale) needs to be softened. This takes place automatically in the integrated water softener. The dishwasher is set at the factory for a hardness level of 2.2 - 2.7 mmol/l (12 - 15 °d).
Before using for the first time Programming the water hardness level Each time a button is pressed one of the indicator lights will flash and light up in the control panel. However, only the indicator lights mentioned in the following programming process stages are significant. The programming procedure can be cancelled at any time by pressing the Off button o. The procedure can then be re-started from the beginning again. ^ Switch the dishwasher off with the Off button o.
Before using for the first time Checking the programmed water hardness level ^ Switch the dishwasher off with the Off button o. ^ Press the programme selector button in, and whilst holding it in switch the dishwasher on using the On button g. Keep the programme selector button pressed in for at least four seconds until the lower right hand programme indicator comes on. ^ Press the programme selector button twice briefly.
Before using for the first time Before using the appliance for the first time you require: – approx. 2 litres of water, – approx. 2 kg dishwasher salt, – domestic dishwasher detergent, – rinse aid formulated for domestic dishwashers. Every dishwasher is tested at the factory. There will be residual water in the appliance from this test. It is not an indication that it has been previously used. The water softener requires dishwasher salt.
Before using for the first time ^ Remove the lower basket and unscrew the salt reservoir cap. Salt indicator Only open the salt reservoir when you want to fill it with dishwasher salt as water or salt solution will run out of the reservoir when the cap is removed. ^ Fill the reservoir with approx. 2 litres of water (first use only). ^ Fill the salt reservoir with dishwasher salt when the salt indicator light comes on. (If it comes on during a programme, wait until the end of the programme).
Before using for the first time Rinse aid Adding rinse aid Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase and helps crockery dry faster after it has been washed. Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically. ,Inadvertently filling the rinse aid reservoir with powder or liquid detergent always causes serious damage to the reservoir.
Before using for the first time Rinse aid indicator When the light comes on the reservoir contains sufficient rinse aid for 2 - 3 programmes only. ^ Add rinse aid only until it is visible in the opening. The rinse aid reservoir holds approx. 110 ml. ^ Add rinse aid in plenty of time. ^ Close the flap firmly so that it clicks into place. Otherwise water would enter the rinse aid reservoir during a programme. ^ Wipe up any spilled rinse aid. This prevents over-foaming occurring during the next programme.
Before using for the first time Setting the rinse aid dosage You can adjust the rinse aid dosage for best results. The rinse aid dosage can be set from approx. 0-6 ml. It is set to a recommended setting of approx. 3 ml at the factory. If spots appear on crockery and glassware: ^ Increase the rinse aid dosage. If clouding or smearing appears on crockery and glassware: ^ Decrease the rinse aid dosage. ^ Switch the dishwasher off with the Off button o.
Loading the dishwasher Note Remove coarse food residues from crockery. There is no need to rinse items under running water. ,Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher. Ash does not dissolve and is distributed in the wash cabinet. Wax, sand, lubricating grease and paint cause damage to the dishwasher.
Loading the dishwasher Items not suitable for dishwashers: – Wooden cutlery and crockery or items with wooden parts: these may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. – Craft items, antiques, valuable vases and decorative glassware are also not suitable for dishwashers. – Plastic items which are not heat resistant. The high temperatures in the dishwasher may cause them to melt or lose shape.
Loading the dishwasher Upper basket ,For safety reasons, do not operate the dishwasher without the upper and lower baskets in place. Hinged cup rack ^ To make room for tall items raise the rack upwards. Positioning rail (depending on model) Glasses can be arranged along the positioning rail to give them some support during the programme. ^ Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls, etc.
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller pieces of crockery in the bottom or upper basket, the upper basket can be adjusted on three levels with 2 cm between each level. Depending on the setting of the upper basket, the following plate dimensions can be accommodated. Dishwasher with cutlery tray (see data plate for model number) The upper basket can also be set at an angle with one side high and the other side low.
Loading the dishwasher Lower basket Hinged spiked insert For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Small items such as saucers can also be placed in the lower basket. Do not place thin, delicate glassware in the lower basket. Both sides of the rear section of the spiked insert can be lowered to make more room for large items, e.g. pots, pans and dishes. ^ Raise and then fold down one side of the spiked insert and then do the same to the other side.
Loading the dishwasher Bottle holder (depending on model) The bottle holder can be used to wash narrow items, e.g. milk and baby bottles. It can be inserted into the bottom basket in more than one place. See the areas marked in white in the illustration. However, do not place a bottle holder in the corners. Water will not be able to access the bottles properly, and they will not get properly clean.
Loading the dishwasher Cutlery Cutlery tray (depending on model) If spoon handles do not fit between the holders, then place them the other way round. ^ Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely.
Loading the dishwasher Cutlery basket (depending on model) ^ To avoid the risk of injury, knives and forks should be placed with the handles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and drier. ^ Fit it into the cutlery basket if required. ^ Place small spoons in the individual slots to either side of the cutlery basket. Cutlery insert for the cutlery basket Use the insert supplied for heavily soiled spoons.
Operation Detergent ,Only use detergents formulated for domestic dishwashers. Do not use washing up liquid. ^ You can use conventional powder detergent, tablets or liquid dishwasher detergent. Refer to the dosing instructions given by the manufacturer on the packaging. ^ Put the detergent into the dispenser compartment. ^ Do not use tablet detergent on the "Quick" programme, as the tablets will not dissolve properly. Failure to dispense the recommended amount of detergent may impair cleaning results.
Operation Adding detergent For information Compartment I holds max. 10 ml, Compartment II holds max. 50 ml. There are markings in compartment II to assist with dispensing: 20, 30. The marks indicate a level of approx. 20 or 30 ml when the door is open in a horizontal position. ^ Press the opening catch on the detergent dispenser. The flap will spring open. The flap is always open at the end of a programme. ^ Add the required amount of detergent and close the flap.
Operation Switching on Starting a programme ^ Open the stopcock, if it is closed. ^ Select the programme required using the programme selector button. ^ Open the door. ^ Make sure the spray arms are not obstructed. ^ Switch the dishwasher on using the On button g. The On indicator light g comes on. Selecting a programme Choose your programme according to the type of load and how dirty it is. The different programmes and their uses are described in the programme chart later on in this booklet.
Operation At the end of a programme Switching off ^ Open the door slightly to check that the programme has finished. At the end of a programme: The indicator light next to the programme selected switches off once the programme has finished. ^ Switch the dishwasher off using the Off button o. If the programme indicator light is still on, the programme has not yet finished. Close the door again to allow the programme to finish. You can then empty the dishwasher.
Operation Interrupting a programme A programme is interrupted as soon as the door is opened. If the door is closed again, the programme will continue from the point it was at before the door was opened. ,Water in the dishwasher may be hot. Danger of scalding! Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle.
Operation Additional functions Buzzer An buzzer sounds at the end of the programme or if there is a fault. You will hear the buzzer at the end of a programme in bursts of five with a short pause in between. The buzzer will continue to sound for up to an hour if you do not switch the dishwasher off. In the event of a fault, the buzzer will sound continuously for up to two minutes if you do not switch the dishwasher off or correct the fault. The buzzer is activated as standard at the factory.
Operation Factory default setting If you have altered any settings from the factory default, you can re-set them back to the factory default settings as follows: ^ Open the door. ^ Switch the dishwasher off with the Off button o. ^ Press the programme selector button in, and whilst holding it in switch the dishwasher on using the On button g. Keep the programme selector button pressed in for at least four seconds until the lower right hand programme indicator comes on.
Cleaning and care Cleaning the control panel Check your dishwasher regularly (approx. every 4 - 6 months). This way faults and problems can be avoided. Cleaning the wash cabinet ,Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition, they could cause serious damage to surfaces. The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. ^ This should only be wiped with a damp cloth.
Cleaning and care Cleaning the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. ,The dishwasher must not be used without all the filters in place. Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use.
Cleaning and care To clean the inside of the filter, the flap must be opened: ^ Press together the catches in the direction of the arrows a as shown, and open the filter b. ^ Rinse all the filters under running water. ^ Then close the flap so that the catch engages. 38 ^ Replace the filter combination so that it lies flat in the base of the wash cabinet. ^ Then turn the handle clockwise to lock the filter combination in place.
Cleaning and care Cleaning the spray arms ^ Remove the lower basket. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). ^ Switch the dishwasher off. Remove the spray arms as follows: ^ Take out the cutlery tray (if your dishwasher is fitted with one). ^ Push the top spray arm upwards to engage the inner ratchet. Then unscrew the spray arm.
Problem solving guide With the aid of the following guide, minor problems can be easily corrected without calling in a Miele service technician, saving you both time and money. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: ,Repairs should only be carried out by a suitably qualified and trained person in accordance with current local and national safety regulations.
Problem solving guide Problem Possible cause Remedy The buzzer sounds. All the programme indicators flash when the door is opened. There may be a technical fault. The drain pump works even when the door is open. The Waterproof System has reacted. – Switch the dishwasher off with the Off button o. After a few seconds: – Switch the dishwasher back on. – Select the programme required with the programme selector button. – Close the door. If the indicator lights flash again, there is a technical fault.
Problem solving guide The dishwasher does not fill/drain Problem The dishwasher stops working shortly after the start of the programme. The buzzer sounds. The Inlet/Drain check indicator flashes when the door is opened. The dishwasher stops during a programme. The buzzer sounds. The Inlet/Drain check indicator flashes when the door is opened. Possible cause The stopcock is closed. Water intake is restricted. Water outlet is restricted, water remains in the wash cabinet at the end of a programme.
Problem solving guide General problems Problem Detergent residue is left in the dispenser at the end of a programme. Possible cause The dispenser was still damp when detergent was added. Remedy Make sure the dispenser is dry before adding detergent. The detergent lid cannot be closed properly. At the end of a programme there is a film of moisture on the inside of the door and the interior walls. Clogged detergent residue Clean the detergent from is blocking the catch. the catch.
Problem solving guide Noises Problem Knocking noise in the wash cabinet. Possible cause A spray arm is knocking against an item in a basket. Remedy Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the wash cabinet. Items of crockery are insecure in the wash cabinet. This may be caused by the on-site installation or the cross-section of the piping. Interrupt the programme, and rearrange the items of crockery.
Problem solving guide Unsatisfactory washing result Problem Possible cause The dishes are not The dishes were not loaded clean. correctly. The programme was not powerful enough. Not enough detergent was dispensed. Items are blocking the path of the spray arms. The filter combination in the base of the wash cabinet is not clean or is not correctly fitted. This may cause the spray arm jets to get blocked. The non-return valve is open and blocked. Dirty water has flowed back into the wash cabinet.
Problem solving guide Problem Possible cause Remedy Dishes, cutlery and glasses are not dry or are flecked. The rinse aid amount may be insufficient or the rinse aid reservoir empty. Replenish the reservoir, increase the dosage or change your rinse aid. See "Before using for the first time". Leave it in for longer. See "Operation". Set the Tab function (if present) to "Normal", and replenish the rinse aid. Crockery was taken out of the cabinet too soon.
Problem solving guide Problem Possible cause Glassware has a brown or blue tinge, and film cannot be wiped off. Glassware is dull and discoloured; film cannot be wiped off. This may be caused by the Change your detergent. detergent. Tea or lipstick stains have not been completely removed. Plastic items are discoloured. There are rust stains on cutlery. Remedy The glassware is not dishwasherproof. The surfaces are affected. The wash temperature of the selected programme was too low.
Problem solving Cleaning the water inlet filter A filter is incorporated in the screw connection of the valve on the water inlet hose. The filter must be cleaned when dirty, otherwise insufficient water flows into the wash cabinet. ,The plastic housing of the water connection contains an electrical component. It must not be dipped in water.
Problem solving Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Watch out for glass or bone splinters which could cause injury. ^ Disconnect the dishwasher from the mains supply. Switch off at the mains socket and withdraw the plug. ^ Take the filter combination out of the wash cabinet (see "Cleaning and care", "Cleaning the filters in the wash cabinet").
Programme chart Programme When to use Sensor wash 55-65 °C Sensor controlled programme for normally soiled crockery Quick wash 40 °C "Quick programme" for lightly soiled crockery, e.g.
Programme chart Programme sequence Consumption Energy Prewash 1 2 Main wash Interim rinse 1 2 Final rinse Drying if required X 55 °- 65 ° if required X 65 ° X X X X 40 ° X X 50 ° X 55 ° X X 65 ° X 40 °/45 ° (depending on model) X X 75 ° X kWh Duration Water Litres Hot Cold water water connec- connection tion (15°C) (55°C) h:min Cold water connection (15°C) Hot water connection (55°C) 1.3-1.6 0.75-1.0 13-22 1:45-2:30 1:35-2:16 0.75 0.22 13 0:33 0:22 X 1.25 0.
After sales service Repairs Future updates (PC) In the event of any faults that you cannot remedy yourself, please contact: The programme update function (PC) is designed to enable a service technician to update your appliance’s electronics in keeping with advances in technology. – your Miele dealer, or – the Miele Service Department (see back cover for contact details).
Optional accessories To make the most of your dishwasher Optional accessories for particular purposes are available from your Miele dealer or from the Spare Parts Department (some may be supplied as standard depending on model). If you would like to … you will need to order … … wash long-stemmed glassware … a glassware insert for the upper basket ... wash bottles, e. g.
Electrical connection Electrical connection U.K. ,All electrical work must be carried out by a suitably qualified and competent person, in accordance with current local and national safety regulations (BS 7671 in the UK). Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.
Plumbing Connection to the water supply ,Water in the dishwasher must not be used as drinking water. – The dishwasher may be connected to a cold or hot water supply, max. 60 °C. We would only recommend connection to a hot water supply if it is economical, e.g. a solar powered supply. When connected to a hot water supply all programme stages which would otherwise be carried out with cold water will be carried out with hot water. – The inlet hose is approx. 1.5 m long. A 1.
Plumbing Drainage Venting the drainage system – The appliance drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. If the on-site drain connection is situated lower than the guide path for the bottom basket rollers in the open door the drainage system must be vented. Otherwise a siphoning effect during a programme can cause the appliance to empty itself of water. – The dishwasher is supplied with approx. 1.
Technical data Dishwasher model G 1XXX G 2XXX Height 80.5 cm (adjustable + 6.5 cm) 84.5 cm (adjustable + 6.5 cm) Height of building-in recess min. 80.5 cm (+ 6.5 cm) min. 84.5 cm (+ 6.5 cm) Width 59.8 cm 59.8 cm Width of building-in recess 60 cm 60 cm Depth 57 cm 57 cm Weight approx. 50.5 kg / 52.0 kg* approx. 52.5 kg / 54.0 kg* Voltage Connected load See data plate on right hand side of door. Fuse rating See data plate / plug.
Alteration rights reserved / G1170/G1180/G2170/G2180 / 1106 M.-Nr.