Operating instructions

Problem Possible cause Remedy
The In-operation
indicator is flashing
quickly. In the
"Without heater"
programme the
following message
appears:
Water intake temp. too
low
The intake water has
not reached the
required temperature of
45°C (see "Connection
to the water supply").
–
Start the programme again.
–
If the fault message
appears again, select a
different programme.
The In-operation
indicator is flashing
quickly.
The buzzer is
sounding.
The following
message appears in
the display:
Drain fault F11
Before rectifying the problem
you must:
–
Switch the dishwasher off
with the Off button V.
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
– Clean the filter
combination. See Cleaning
and care.
– Clean the drain pump. See
Maintenance).
– Clean the non-return valve.
See Maintenance).
– Remove any kink in the
drain hose.
– Remove drain hose and
check for any blockages in
the drain pipe.
Problem solving guide
51