Dishwasher User Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the dishwasher 7
- Caring for the environment 9
- Before using for the first time 10
- Loading the dishwasher 14
- Optional accessories 25
- Use 26
- Additional options 33
- Frequently asked questions 39
- After sales service 46
- User Maintenance Instructions 47
- Cleaning and Care 48
- Installation instructions 53
- Electrical connection 54
- Plumbing 56
- Noise measurement 58
Faults in the water intake or water drain
Problem Possible fault Solution
The Intake/Drain
indicator light
alternates between
flashing and
remaining steady.
The water supply is
closed.
Open the water supply all the
way.
The dishwasher
stops running.
The Intake/Drain
indicator light
flashes.
The time display
shows fault FXX.
Before fixing the fault:
– Press the K button to turn the
dishwasher off.
Fault F12/F13:
Water intake fault.
– Open the water supply all the
way.
– Clean the screen in the water
intake (see User maintenance
instructions).
– The water pressure at the
water connection is less than
4.35 psi.
Consult a plumber.
Fault F11:
Water drainage fault.
There might be water in
the wash cabinet.
– Clean the triple filter (see
"Cleaning and care").
– Clean the drain pump (see
"User maintenance
instructions").
– Clean the non-return valve
(see "User maintenance
instructions").
– Remove any kinks or high
loops in the drain hose.
Frequently asked questions
40