Classic Plus Pre-Finished Dishwasher CLASSIC PLUS G 4926 U, G 4926 SCU, G 4926 U, G 4926 SCU 8mieleusa.
Classic Plus Pre-Finished Dishwasher SPECIFICATIONS Overall Unit Width 239/16” (598mm) Overall Unit Height 3311/16” - 361/4” (855 - 920mm) Overall Unit Depth 227/16” (570mm) Niche Minimum Cabinet Opening Width 235/8” (600mm) Minimum Cabinet Opening Height 333/4” (857mm) Minimum Cabinet Opening Depth 227/16” (570mm) Plumbing Water Supply Requirements May be connected to a cold or hot water supply up to a maximum of 140°F/60°C. Must be connected to a shut-off valve with a male 3/8” compression.
Classic Plus Pre-Finished Dishwasher INSTALLATION SPECIFICATIONS Drain - 4 ft 11 in (1.5 m) flexible drain hose. (Connects from lower center rear) Water - 4 ft 11 in (1.5 m) flexible water intake hose with 3/8” compression fitting. (Connects from lower center rear) Electric 4 ft 11 in (1.5 m) 120V 15 A 3 wire molded NEMA 5-15 plug power supply.
Classic Plus Pre-Finished Dishwasher Panel Specification Classic Plus Prefinished Dishwasher Page 4 of 5 Specification Sheets TRS 02282017
Classic Plus Pre-Finished Dishwasher Acceptable Height Istallation Classic Plus Prefinished Dishwasher Page 5 of 5 Specification Sheets TRS 02282017
