Operation Manual

Before using the appliance for
the first time, you require:
–
approx. 2 litres of water,
–
approx. 2 kg dishwasher salt*,
–
domestic dishwasher detergent*,
–
rinse aid* formulated for domestic
dishwashers.
* See "Optional accessories".
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
Filling the salt reservoir
If the water in your area is very soft
and constantly lower than
0.7 mmol/l (4 °d) you do not need to
add dishwasher salt. The water
softener must, however, still be
programmed to correspond to the
water hardness level in your area.
Important: Before filling the salt
reservoir with dishwasher salt for the
first time, you must fill it with
approx. 2 litres of water to enable
the salt to dissolve. Once the
dishwasher has been used, there is
always sufficient water in the
reservoir.
,
Inadvertently filling the salt
reservoir with powder or liquid
dishwasher detergent will damage
the water softener. Make sure you
have picked up the correct packet
of dishwasher salt before filling the
salt reservoir!
,
Please only use special coarse
grained dishwasher salt for
reactivation, as other salts may
contain insoluble additives which
can impair the functioning of the
softener.
Before using for the first time
18