Operation Manual

Turbo
The Turbo function is used to reduce
the duration of programmes in which
this function is available.
In order to achieve optimum cleaning
results, consumption rates are
increased when Turbo has been
selected.
If a full programme is not yet required
the Turbo function can be used in
conjunction with the Quick wash
programme to rinse dirty crockery,
using cold water only and without a
drying cycle.
^ Switch the dishwasher on using the
On/Off button K.
The Start/Stop indicator light will flash.
^ Select a programme.
^ Press the Turbo button.
The Turbo indicator light will come on.
^ The programme can now be started.
The option selected is active on all
programmes until the setting is
changed.
DetergentAgent
For optimum cleaning results, the
dishwasher automatically adjusts the
programme sequence to the type of
detergent being used. Depending on
the programme, this can mean that the
running time and energy consumption
vary slightly.
Follow the detergent manufacturer's
instructions on dosage.
The cleaning and drying
performance of different types of
detergent can vary greatly.
If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can switch the
refill indicators off if you wish (see
"Before using for the first time -
Switching off the refill indicators"). The
DetergentAgent function will not be
affected by this.
Please make sure that if you start
using dishwasher salt and rinse aid
again, you switch the refill indicators
back on.
Additional functions
39