Operation Manual

Delay start
The start time of a programme can be
delayed, e.g. to benefit from economy
rates of electricity. A Delay start time of
between 30 minutes and 24 hours can
be selected.
With a Delay start time of between 30
minutes and 9 hours 30 minutes, the
time is set in 30 minute increments. For
10 hours or more it is set in one hour
increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
Do not use liquid detergent when
selecting Delay start, as it can run
into the dishwasher before it is
required.
^
Switch the dishwasher on using the
On/Off button K.
The Start/Stop indicator light will flash.
^
Select the programme required with
the programme selector button.
^
Press the Delay start button.
The last Delay start time used will
appear in the display. The Delay start
indicator light will come on.
^
Set the time required using the Delay
start button.
If the button is kept pressed in, the time
will increase automatically up to 24^.To
start at 30 minutes again, press the
Delay start button twice.
^ Press the Start/Stop button.
The Start/Stop indicator light will light
up constantly.
Additional functions
40