Operation Manual

Switching on
^
Make sure the spray arms are not
obstructed.
^
Close the door.
^
Open the stopcock, if it is closed.
^
Switch the dishwasher on with the
On/Off button K.
The last programme selected will
appear in the display and the
appropriate indicator light will come on.
After a short while, the estimated
programme duration for the programme
selected will appear in the display.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
^
Select the programme required with
the programme selector button.
The indicator light next to the selected
programme will come on.
You can now select additional
functions (see "Additional functions").
Starting the programme
^
Press the Start/Stop button.
The programme will begin.
If any additional functions are selected,
the appropriate indicators will also light
up.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
33