Operation Manual

With the help of the following guide, minor faults in the performance of the

appliance, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

Repairs should only be carried out by a suitably qualified and trained

person in strict accordance with current local and national safety regulations.

Unauthorised or incorrect repairs could cause personal injury or damage to the

appliance.

Technical problems

Problem Possible cause Remedy

The display remains

dark and the Start/Stop

indicator light is not

flashing after the

dishwasher has been

switched on with the

On/Off button K.

The appliance is not

plugged in.

Insert the plug and switch

on at the socket.

The mains fuse has

tripped.

Reset the trip switch or

replace the fuse in the

plug.

(Minimum fuse rating -

see data plate).

The dishwasher stops

during a programme.

The mains fuse has

tripped.

– Reset the trip switch or

replace the fuse in the

plug (minimum fuse

rating - see data plate).

–

If the mains fuse trips

again, call the Miele

Service Department.

Problem solving guide