Operation Manual

General problems
Problem Possible cause Remedy
The indicators and
display are dark. Only
the Start/Stop indicator
light is flashing slowly.
The indicators and
display have switched
off automatically to
save energy (Standby
mode).
Press the On/Off button K.
This switches Standby off.
Detergent residue is left
in the dispenser at the
end of a programme.
The dispenser was still
damp when detergent
was added.
Make sure the dispenser is
dry before adding detergent.
The detergent dispenser
lid cannot be closed
properly.
Clogged detergent
residue is blocking the
catch.
Clean the detergent from the
catch.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
This is caused by the
drying system and
does not indicate a
fault.
The moisture will dissipate
after a while.
Water remains in the
wash cabinet at the end
of a programme.
Before rectifying the
problem:
– Switch the dishwasher off
using the On/Off button K.
The filter combination
in the wash cabinet is
clogged.
Clean the filter combination.
See "Cleaning and care".
The drain pump or
non-return valve may
be blocked.
Clean the drain pump or the
non-return valve. See
"Maintenance".
The drain hose is
kinked.
Remove any kink from the
drain hose.
Problem solving guide
48