Operation Manual

Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor wash
programme has been activated, the
amount of rinse aid dispensed in the
Sensor wash programme can be higher
than that set.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
^ Select the rinse aid dosage you want,
and confirm your selection with the
middle button underneath the
display.
Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^
Select the setting you want, and
confirm your selection with the
middle button underneath the
display.
Settings menu
68