Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. en - GB M.-Nr.
Contents Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Appliance overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Caring for the environment . . . . .
Contents Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Future updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 For testing institutes . . . .
Guide to the appliance Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Safety lock in door grip (not visible) d Middle spray arm j Rinse aid reservoir e Air inlet for drying (depending on model) k Dual compartment detergent dispenser f Lower spray arm l Salt reservoir 5
Guide to the appliance Control panel a Programmes e Turbo button with indicator light b Display f Intensive lower basket button with indicator light c Start/Stop button with indicator light d Delay start button with indicator light g Programme selector button h On/Off button K This instruction book applies to several different dishwasher models. The specific dishwasher models are referred to as follows: Standard = 80.5 cm high dishwashers (integrated) and 84.
Warning and safety instructions This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance. Keep these instructions in a safe place and pass them on to any future owner.
Warning and safety instructions Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Under no circumstances should you use a damaged appliance. It could be dangerous. ~ The dishwasher must only be plugged into the electricity supply via a suitable switched socket. The electrical socket must be easily accessible after the dishwasher is installed so that it can be disconnected from the electricity supply at any time. (See "Electrical connection").
Warning and safety instructions ~ This appliance must not be used in a non-stationary location (e.g. on a ship). ~ The plastic housing of the water connection contains an electrical component. The housing must not be submerged in water. ~ There are electrical wires in the water inlet hose. Never cut the water inlet hose, even if it is too long. ~ The integrated Waterproof System ~ A damaged appliance could be dangerous.
Warning and safety instructions Installation Correct use ~ The dishwasher must be installed and connected in compliance with the diagram supplied. ~ Do not use solvents in the ~ The dishwasher must be correctly detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. Consult a doctor immediately if detergent has been swallowed or inhaled. aligned to ensure problem-free operation.
Warning and safety instructions ~ Inadvertently filling the salt reservoir with powder or liquid dishwasher detergent will damage the water softener. Make sure you have picked up the correct packet of dishwasher salt before filling the salt reservoir! ~ Please only use special coarse grained dishwasher salt for reactivation, as other salts may contain insoluble additives which can impair the functioning of the softener.
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation.
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your appliance by following these tips: ^ If your water supply is suitable, this dishwasher can be connected to hot water for further economies. If the water is heated by solar panels, for example, this would be energy efficient. However, if your water is heated by electricity we would recommend connection to cold water.
Before using for the first time To open the door Safety lock ^ Reach under the handle and pull the door open. Use the safety lock to prevent children opening the dishwasher door. If the door is opened during operation all functions are automatically interrupted. ^ To lock the door, push the slide underneath the door grip to the right. To close the door ^ Push the baskets right in. ^ Then raise the door up, and push until it clicks into position. 14 ^ To unlock the door, push the slide to the left.
Before using for the first time Display General The display is used to select or set the following: – – – – the programme extras the delay start time settings During a programme, the display shows the following: – the stage the programme is at – the estimated time left for the programme to run – any relevant fault messages and notes To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time (see "Operation, Standby").
Before using for the first time Basic settings ^ Switch the dishwasher on with the On/Off button K. If the dishwasher is being switched on for the first time, the welcome screen will appear. Language The display will then change automatically to the screen for setting the language. See "Display" for more information about the display. ^ Select the language you want, and confirm your selection with the middle button underneath the display. A tick ( will appear next to the language that has been set.
Before using for the first time Before using the appliance for the first time, you require: – approx. 2 litres of water, – approx. 2 kg dishwasher salt*, – domestic dishwasher detergent*, – rinse aid* formulated for domestic dishwashers. *See "Optional accessories". Every dishwasher is tested at the factory. There will be residual water in the appliance from this test. It is not an indication that it has been used previously.
Before using for the first time Important: Before filling the salt reservoir with dishwasher salt for the first time, you must fill it with approx. 2 litres of water to enable the salt to dissolve. Once the dishwasher has been used, there is always sufficient water in the reservoir. ,Inadvertently filling the salt reservoir with powder or liquid dishwasher detergent will damage the water softener.
Before using for the first time "Replenish salt" message ^ Fill the salt reservoir with dishwasher salt for reactivation when the F Replenish salt message appears. (If it appears during a programme, wait until the end of the programme). If you only ever use combination products containing salt and rinse aid in your dishwasher, you can switch the reminders off if you wish (see "Settings menu - Replenish salt and rinse aid reminders"). ^ Confirm by pressing the middle button underneath the display.
Before using for the first time Rinse aid Adding rinse aid Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase and helps crockery dry faster after it has been washed. Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically. ,Inadvertently filling the rinse aid reservoir with powder or liquid detergent will always cause serious damage to the reservoir.
Before using for the first time Replenish rinse aid message When the ( Replenish rinse aid message appears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. ^ Add rinse aid in plenty of time. ^ Confirm by pressing the middle button underneath the display. The "Replenish rinse aid" message will go out. ^ Add rinse aid only until it is visible in the opening. The rinse aid reservoir holds approx. 110 ml. ^ Close the flap firmly so that it clicks into place.
Loading the dishwasher Note Remove coarse food residues from crockery. There is no need to rinse items under running water. ,Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher. These substances will damage the dishwasher. Crockery can be loaded anywhere in the baskets, but the following notes should be observed: – Do not place crockery and cutlery inside other pieces where they may be concealed. – Load the crockery so that water can access all surfaces.
Loading the dishwasher Items not suitable for dishwashers: – Wooden cutlery and crockery or items with wooden parts: these may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. – Craft items, antiques, valuable vases and decorative glassware are also not suitable for dishwashers. – Plastic items which are not heat resistant: the high temperatures in the dishwasher may cause them to melt or lose shape.
Loading the dishwasher Upper basket ,For safety reasons, do not operate the dishwasher without the upper and lower baskets in place (except when running the Tall items 65 °C programme, if available). Hinged spikes The rows of spikes can be lowered to make more room for larger items such as casserole dishes. ^ Press the yellow lever downwards a, and then lower the spikes b. ^ Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls, etc.
Loading the dishwasher Jumbo cup rack (depending on model) The cup rack can be set at two different widths so that it can also accommodate large cups. ^ You can also move one of the side inserts of the cutlery tray to make more room for tall glasses. Adjusting the height You can set the glass rail at two different heights. ^ Pull the cup rack upwards and click it back into position at the required width. Glass rail ^ Pull the rail upwards and click it back into position at the required height.
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower or upper basket, the upper basket can be adjusted on three levels with 2 cm between each level. The upper basket can also be set at an angle with one side high and the other side low. This can be useful to help prevent water being left in deep dishes etc. Ensure, however, that the basket can slide smoothly in and out of the cabinet. It is better to adjust the basket before loading it.
Loading the dishwasher Lower basket ^ For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Glasses, cups and small items such as saucers can also be placed in the lower basket. Do not place thin, delicate glassware in the lower basket. Heavily soiled items Dishwashers with cutlery tray ^ Place large platters and dishes in the centre of the lower basket. When tilted, plates up to 35 cm in diameter can be accommodated.
Loading the dishwasher MultiComfort area Hinged spikes (depending on model) The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans. The spikes at the front are used for washing plates, soup bowls, platters, dessert bowls and saucers. ^ The glass rack can be raised to make more room for tall items. Both rows of spikes can be lowered to make more room for large items, e.g. pots, pans and dishes. ^ Stem glassware, e.g.
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) If spoon handles do not fit between the holders, then lay them the other way round. ^ Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely.
Loading the dishwasher Cutlery basket (depending on model) The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. ^ Fit it onto the cutlery basket if required. ^ To avoid the risk of injury, knives and forks should be placed with the handles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and drier. ^ Place small items of cutlery in the individual slots on three sides of the cutlery basket.
Operation Detergent ,Only use detergents formulated for domestic dishwashers. Do not use washing-up liquid. Active ingredients Modern detergents contain various active ingredients, the most important of which are: – Phosphates to prevent calcification. – Alkalis to aid removal of dried on soiling. – Enzymes to break down starch and loosen protein. – Oxygen based bleaching agents to remove coloured stains (e.g. tea, coffee, tomato sauce).
Operation ,Avoid inhalation of powder detergents and do not ingest dishwasher detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. Consult a doctor immediately if detergent has been swallowed or inhaled. Keep detergent and other household agents out of the reach of children at all times. Keep children away from the dishwasher when the door is open.
Operation Switching on Starting the programme ^ Make sure the spray arms are not obstructed. ^ Press the Start/Stop button. ^ Close the door. ^ Open the stopcock, if it is closed. ^ Switch the dishwasher on with the On/Off button K. The last programme selected will appear in the display and the appropriate indicator light will come on. After a short while, the estimated programme duration for the programme selected will appear in the display. The programme will begin.
Operation Display Standby The duration of the programme selected appears in hours and minutes in the display before the programme begins. During the programme, the time left until the end of the programme is displayed. To save energy, the dishwasher will switch to Standby mode a few minutes after the last time a button has been pressed or a few minutes after the end of the programme. The display and the indicator lights will go out and only the Start/Stop indicator will flash slowly.
Operation At the end of the programme Unloading the dishwasher O Finished Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before unloading them. will appear in the display when the programme has finished. The drying fan will continue to run for a few minutes at the end of the Quick wash programme. You can now empty the dishwasher.
Operation Interrupting a programme A programme is interrupted as soon as the door is opened. If the door is closed again, the programme will continue from the point it was at before the door was opened. ,Water in the dishwasher may be hot. Danger of scalding. Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle.
Additional functions Intensive lower basket Turbo The Intensive lower basket additional function allows you to wash heavily soiled items in the lower basket while washing more delicate items in the upper basket. The Turbo function is used to reduce the duration of programmes in which this function is available. Cleaning perfomance in the lower basket is intensified in programmes where this function is available. Depending on the programme, this can mean that the running time varies slightly.
Additional functions Delay start ^ Press the Start/Stop button. The start time of a programme can be delayed, e.g. to benefit from economy rates of electricity. A delay start time of between 30 minutes and 24 hours can be selected. The delay start time is set in 30 minute steps. The Start/Stop indicator light will light up constantly. When using the Delay start function, make sure that the detergent compartment is dry before adding detergent. Wipe dry with a cloth if necessary.
Additional functions Starting a programme before the Delay start period has elapsed: A programme can be started before the Delay start period has elapsed. Proceed as follows: ^ Press the Start/Stop button for at least one second. The Delay start indicator light will go out and the Start/Stop indicator light will flash. ^ Press the Start/Stop button again. The programme will begin. The Start/Stop indicator light will light up constantly.
Cleaning and care Cleaning the door front Check your dishwasher regularly (approx. every 4 - 6 months). This way faults and problems can be avoided. ,The external surfaces of the dishwasher are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the external surfaces. ,Remove any soiling immediately. If this is not done it might become impossible to remove and could cause the external surfaces to alter or discolour.
Cleaning and care Checking the filters in the wash cabinet Cleaning the filters ^ Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. ,This dishwasher must not be used without all the filters in place. Collection of coarse soil may cause the filters to clog.
Cleaning and care To clean the inside of the filter, the flap must be opened: ^ Press catches a together in the direction of the arrows as shown, and open the filter b. ^ Rinse all the filters under running water. ^ Then close the flap so that the catch engages. 42 ^ Replace the filter combination so that it lies flat in the base of the wash cabinet. ^ Then turn the handle clockwise to lock the filter combination in place.
Cleaning and care Cleaning the spray arms ^ Remove the lower basket. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). ^ Switch the dishwasher off. Remove the spray arms as follows: ^ Take out the cutlery tray (if your dishwasher is fitted with one). ^ Push the top spray arm upwards to engage the inner ratchet. Then unscrew the spray arm.
Problem solving guide With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repairs should only be carried out by a suitably qualified and trained person in strict accordance with current local and national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to the appliance.
Problem solving guide Problem Possible cause Remedy Before rectifying the problem: – Switch the dishwasher off using the On/Off button K. The following fault message appears in the display: ; Fault FXX There may be a technical fault. L Waterproof The Waterproof system – Close the stopcock. has reacted. – Call the Service Department. After a few seconds: – Switch the dishwasher back on. – Select the programme you want. – Press the Start/Stop button.
Problem solving guide Water inlet/drain fault Problem The following fault message appears in the display: Possible cause 2 Open stopcock The stopcock is closed. Open the stopcock fully. 2 Inlet Before rectifying the problem: – Switch the dishwasher off using the On/Off button K. Water intake is restricted. 46 Remedy – Open the stopcock fully and start the programme again. – Clean the water inlet filter (see "Maintenance"). – The water pressure at the intake is lower than 30 kPa (0.3 bar).
Problem solving guide Problem Possible cause The following fault message appears in the display: Before rectifying the problem: – Switch the dishwasher off using the On/Off button K. The water outlet is – Clean the filter restricted, water remains combination. See in the wash cabinet at the "Cleaning and care". end of a programme. – Clean the drain pump. See "Maintenance". – Clean the non-return valve. See "Maintenance". – Remove any kink in the drain hose.
Problem solving guide General problems Problem The indicators and display are dark. Only the Start/Stop indicator light is flashing slowly. Possible cause The indicators and display have switched off automatically to save energy (Standby mode). Detergent residue is left The dispenser was still in the dispenser at the damp when detergent end of a programme. was added. The detergent dispenser Clogged detergent lid cannot be closed residue is blocking the properly. catch.
Problem solving guide Noises Problem Knocking noise in the wash cabinet. Possible cause A spray arm is knocking against an item in a basket. Rattling noise in the wash cabinet. Items of crockery are insecure in the wash cabinet. A foreign object (e.g. a cherry stone) has becomed lodged in the drain pump. Knocking noise in the water pipes. This may be caused by the on-site installation or the cross-section of the piping.
Problem solving guide Unsatisfactory washing result Problem Possible cause The dishes are not The dishes were not loaded clean. correctly. The programme was not powerful enough. There is some stubborn soiling although most of the crockery is only lightly soiled (e.g. with tea stains). Not enough detergent was dispensed. Items are blocking the path of the spray arms. The filter combination in the base of the wash cabinet is not clean or is not correctly fitted.
Problem solving guide Problem Possible cause Remedy Dishes, cutlery and The amount of rinse aid may Replenish the reservoir, glasses are not dry be insufficient, or the rinse increase the dosage or or are flecked. aid reservoir empty. change the brand of rinse aid (see "Before using for the first time: Rinse aid"). Leave it in for longer. See Crockery was taken out of the cabinet too soon. "Operation".
Problem solving guide Problem Possible cause Remedy Glassware has a brown or blue tinge, and film cannot be wiped off. Glassware is dull and discoloured; film cannot be wiped off. This may be caused by the detergent. Change your detergent. The glasses are not dishwasher-proof. The surfaces are affected. There is no remedy. Purchase glassware which is dishwasher-proof. Tea or lipstick stains The wash temperature of have not been the selected programme completely removed. was too low.
Maintenance Cleaning the water inlet filter A filter is incorporated in the screw connection of the valve on the water inlet hose. The filter must be cleaned when dirty, otherwise insufficient water flows into the wash cabinet. ,The plastic housing of the water connection contains an electrical component. It must not be dipped in water.
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. ^ Disconnect the dishwasher from the mains supply. Switch off at the mains socket and withdraw the plug. ^ Take the filter combination out of the wash cabinet (see "Cleaning and care - Checking the filters in the wash cabinet").
Optional accessories To make the most of your dishwasher Optional accessories for particular purposes are available from your Miele dealer, from the Miele Spare Parts Department or via the Internet at www.miele-shop.com (some may be supplied as standard, depending on model). If you would like to … you will need to order … ... wash a Miele Cappuccinatore … a Cappuccinatore insert for the upper basket ... wash additional items of cutlery … a cutlery basket for the lower basket ...
Programme chart Crockery Mixed, everyday crockery Food deposits All normal food deposits Action required This needs an adaptable programme... Shorter duration... Heat-sensitive glasses and plastic This needs a short programme... Fresh, easily removed food deposits This needs a gentle programme with glass care... Mixed crockery This needs a standard programme... Normal food deposits which have begun to dry on Shorter duration... To save water and energy...
Programme chart Programme Detergent Compartment I 2) Compartment II 2) – 25 ml or 1 tab Quick wash 40°C – 25 ml or 1 tab 3) Sensor wash gentle – 25 ml or 1 tab – 25 ml or 1 tab 3) – 25 ml or 1 tab 10 ml 25 ml or 1 tab – – Sensor wash + Turbo option Light soiling 50°C + Turbo option Energy save Pots & pans 75°C + Turbo option Quick wash 40°C + Turbo option 2) 3) see "Detergent" In some cases, tabs may not dissolve completely.
Programme chart Programme Programme sequence Pre-wash Sensor wash Main wash °C Interim rinse 1 2 Final rinse °C Drying Variable programme sequence, sensor controlled adjustment according to the amount of crockery and level of food deposits If required Quick wash 40 °C 45-65 40 Sensor wash gentle # If required X 68 X 45 X Variable programme sequence with glass care, sensor controlled adjustment according to the amount of crockery and level of food deposits 55 X Energy save If required 4
Programme chart Consumption 1) Electricity Duration 1) Water Cold water connection (15 °C) kWh Hot water connection (55 °C) kWh Litres Cold water connection (15 °C) h:min Hot water connection (55 °C) h:min 0.95-1.35 0.70-1.00 10.0-17.0 1:36-2:38 1:23-2:21 0.60 0.25 10.0 0:38 0:27 0.70-0.95 0.40-0.50 10.0-17.0 1:26-2:02 1:17-1:43 0.94 2) / 0.93 3) 0.59 2) / 0.58 3) 10.0 2:52 2:43 1.20 0.90 10.0 1:42 1:33 1.55 1.15 13.
After sales service Repairs Future updates In the event of any faults that you cannot remedy yourself, please contact: The programme update function is designed to enable a service technician to update your appliance's electronics in keeping with advances in technology. – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service.
Electrical connection Electrical connection U.K. ,All electrical work must be carried out by a suitably qualified and competent person, in accordance with current local and national safety regulations (BS 7671 in the UK). Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.
Plumbing The Miele waterproof anti-leak system Providing your dishwasher has been installed correctly, the Miele waterproof anti-leak system will protect you from water damage throughout its lifetime. Connection to the water supply ,Water in the dishwasher must not be used as drinking water. – The dishwasher may be connected to a cold or hot water supply, max. 60 °C. We would only recommend connection to a hot water supply if it is economical, e.g. a solar powered supply.
Plumbing – The water pressure (flow pressure at the take-off point) must be between 30 and 1000 kPa (0.3 and 10 bar). If the water pressure is lower than this, the fault message Water inlet fault will appear in the display (see Problem solving guide). If the water pressure is too high, a pressure reducer valve must be fitted. ,To avoid any damage to the appliance, the dishwasher must only be connected to a fully vented plumbing system.
Plumbing Drainage – The appliance drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. – The dishwasher is supplied with approx. 1.5 m of flexible drain hose with an internal diameter of 22 mm. – The drain hose can be extended using a connection piece to attach a further length of hose. The drainage length must not be longer than 4 m, and the delivery head must not exceed 1 m.
Technical data Dishwasher model Standard XXL Height freestanding 84.5 cm (adjustable +3.5 cm) - Height built-in 80.5 cm (adjustable + 6.5 cm) 84.5 cm (adjustable + 6.5 cm) Height of building-in recess Min. 80.5 cm (+ 6.5 cm) Min. 84.5 cm (+ 6.5 cm) Width 59.8 cm 59.8 cm Width of building-in recess 60 cm 60 cm Depth: Freestanding Built-in 60 cm 57 cm 57 cm Weight Max. 67 kg Max.
Settings menu Settings menu for changing standard settings To open the Settings menu ^ Switch the dishwasher off with the On/Off button K, if it is switched on. ^ Press and hold the Start/Stop button pressed in. ^ Switch on the dishwasher with the On/Off button K and keep the Start/Stop button pressed in for at least 4 seconds. The first option of the Settings menu will appear in the display and all the indicator lights will come on. See "Display" for more information about the display.
Settings menu Water hardness level Your dishwasher is fitted with a water softener which you need to programme to the water hardness level in your area. – Your local water authority will be able to advise you of the water hardness level in your area. – Where the water hardness fluctuates e.g. between 6.7 - 9.0 mmol/l (37 50 °d - German scale) always programme the dishwasher to the higher value (9.0 mmol/l in this example). A tick ( will appear beside the water hardness which has been set.
Settings menu Rinse aid Sensor wash You can adjust the rinse aid dosage for best results. The rinse aid dosage can be set from approx. 0-6 ml. The factory default setting is 3 ml. You can adjust the Sensor wash programme so that it will remove stubborn soiling in a lightly soiled load. If the function to adjust the Sensor wash programme has been activated, the amount of rinse aid dispensed in the Sensor wash programme can be higher than that set.
Settings menu Optimise standby To save energy, the dishwasher will switch to Standby mode a few minutes after the last time a button has been pressed or a few minutes after the end of the programme. The display and indicator lights will go out and only the Start/Stop indicator light will flash slowly. If the dishwasher is not switched off at the end of the programme, it will switch off completely after a few minutes in Standby mode. The Optimise standby function can be deactivated if wished.
Settings menu Soak Longer drying You can use the Soak function in the programme selected for loosening very stubborn food residues from pots, pans and casserole dishes. It is not available for every programme. If you are using powder dishwasher detergent, add approx. 5 g to compartment I. The fan runs for longer at the end of a programme to improve the drying result. The Longer drying function is not available for every programme.
Settings menu Check filters Factory default You can adjust the interval at which the reminder to check the filters appears. You can set an interval of between 30 and 60 programme cycles. If you have altered any settings from the factory default, you can reset them back to the factory default settings. The "Check filters" message is set at the factory to appear after every 50 programme cycles. ^ Select the interval you want and confirm with the middle button underneath the display.
Alteration rights reserved/ G5500/G5505/G5510/G5515 / 0511 M.-Nr.