Operation Manual

General problems
Problem Possible cause Remedy
The indicators and
display are dark. Only
the Start/Stop indicator
light is flashing slowly.
The indicators and
display have switched
off automatically to
save energy (Standby
mode).
Press the On/Off button K.
This switches Standby off.
The following fault
message appears in the
display:
F Salt reservoir lid
The salt reservoir lid
has not been closed
properly.
–
Close the salt reservoir lid
properly.
If the salt reservoir lid has
sprung open during a
programme:
– Switch the dishwasher off
and then on again with the
On/Off button K.
– Start the programme
again.
Problem solving guide
48