Operation Manual

Programming the water hardness
level
^
Switch the dishwasher off.
^
Turn the programme selector to the
"Stop" position.
^
Press the "Top Solo" button in and
whilst holding it in
switch the dish
-
washer on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator light will flash.
Note:
If a different indicator light comes on or
flashes, the process must be repeated.
Exception:
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^
Turn the programme selector to the
position that corresponds to your wa-
ter hardness level (see chart below).
°d
German
scale
mmol/l Programme selector
setting
1 - 4 0.2 - 0.7 "1 o’clock" position
5 - 7 0.9 - 0.3 "2 o’clock" position
8 - 11 1.4 - 2.0 "3 o’clock" position
12 - 16 2.2 - 2.9 "4 o’clock" position
17 - 21 3.1 - 3.8 "5 o’clock" position
22 - 24 4.0 - 4.3 "6 o’clock" position
25 - 31 4.5 - 5.6 "7 o’clock" position
32 - 70 5.8 - 12.6 "8 o’clock" position
The dishwasher is set at the factory for
a hardness level of 2.2 -2.9 mmol/l
(12 -16 °d ).
Example:
For a water hardnesss of 1.6 mmol/l,
turn the programme selector to the
"3 o’clock" position.
Before using for the first time
14