Operating instructions

Operation
46
Energy management
To save energy, the dishwasher will
switch off aut
omatically 10 minutes af‐
ter the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme op‐
tions, Optimise standby").
 P
ress the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a pr
ogramme is running, during
the Delay start period or if there is a
fault.
At the end of a programme
The programme has finished when .
appears in the display and the door has
opened slightly (if applicable).
The drying fan may continue to run for
a few minut
es at the end of the pro‐
gramme.
 Open the door complet
ely to re-en‐
gage the door closing mechanism.
You can now empty the dishwasher.
 I
f you have deactivated the auto‐
matic door opening function (see
"Programme options, AutoOpen"),
and would like to open the door as
soon as the programme has finished
make sure that you open the door
fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
workt
op because the fan is no longer
running.