Operation Manual

Interrupting a programme
A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Warning:
Water in the dishwasher may be hot.
Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme cau-
tion when doing so. Before closing
the door again, leave it ajar for ap-
prox. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly making
sure that it clicks into place.
Changing a programme
If a programme has already started
and you wish to change it proceed as
follows:
Turn the programme selector (17) to
the "Stop" position.
Leave the programme selector (17)
in this position for at least one sec-
ond.
Then turn the programme selector
(17) to the programme you wish to
use.
Press the "Start" button (18).
The programme commences.
Operating the dishwasher
36