Operation Manual

Problem Possible cause Remedy
The indicator light
“Inlet/Outlet” is flashing
and the programme
does not continue
Before rectifying the
problem you must:
– Turn the programme
selector to the “Stop”
position.
– Switch the dishwasher
off using the “On/Off”
button.
Water intake is restricted. – Open the stopcock
fully.
– Check the water inlet
filter and clean if
necessary, see
“Cleaning the water
inlet filter”.
– Check the water level
and if necessary
increase the water
intake time, see
“Increasing the water
intake time”.
Water outlet is restricted.
Water remains in the
wash cabinet at the end
of a programme.
– Clean the filter
combination, see
“Cleaning and Care”.
– Clean the drain pump.
– Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
– Remove any kink in the
drain hose.
Problem solving guide
43