Operation Manual

Comparison tests

Test standard: EN 50242 / IEC 704

Standard programme Economy 45 °

for comparison tests

(energy label):

Note: The Universal Plus 55º programme for normal soiling

has increased wash and drying results with shorter

running times and increased energy requirements.

Amount washed: 12 place settings

Amount of detergent: If using a detergent containing chlorine:

5 g in compartment I and 25 g in compartment II.

If using a chlorine-free detergent:

30 g

only in compartment II.

Rinse aid dispensing: Setting 3 (approx. 3 ml, set at factory)

Water hardness level

selector: Setting 0

Noise measurements: Before starting a programme to measure noise, the

dishwasher door must first be opened completely, and

then closed.Doing this will automatically close the

ventilation outlet for the Turbothermic process.

Dishwashers with cutlery basket

Spoon inserts: Fit the two inserts on top of the cutlery basket

(see section on loading the dishwasher, spoon inserts).

Place six spoons at intervals in each insert.

Upper basket

Lower basket

Comparison tests