Operation Manual
Table Of Contents
- Contents
- Guide to the appliance
- Warning and Safety instructions
- Caring for the environment
- Before using for the first time
- Loading the dishwasher
- Operation
- Programme options
- Programme chart
- Cleaning and care
- Problem solving guide
- Maintenance
- After sales service
- Optional accessories
- Electrical connection
- Plumbing
- Technical data
- Settings menu
- Settings menu for changing standard settings
- To open the Settings menu
- Language
- Time
- Water hardness
- Rinse aid
- Consumption (EcoFeedback)
- EcoStart
- Sensor wash
- AutoOpen
- BrilliantLight
- Optimise standby
- Refill reminders
- Check filters
- Soak
- Pre-wash
- Brightness
- Volume
- Memory
- Version info
- Showroom programme
- Factory default
- To close the Settings menu
![](/manual/miele/g-6475-scvi-xxl/operation-manual-dutch/images/img-49.png)
Operation
49
Open the door
.
The dishwasher can be switched off
at any time using the
button.
Switching the dishwasher off during a
pr
ogramme stops the programme.
Switching the dishwasher off during the
run-u
p to a delay start time (FlexiTimer)
will also stop the process.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on
holiday, the stopcock
should be closed.
Unloading the dishwasher
Dishes tend to break and chip more
easi
ly when they are hot. Allow the
dishes to cool until they are comforta‐
ble enough to handle before unloading
them.
If you open the door fully after switch‐
ing
off, the dishes will cool much faster.
First unload the lower basket, then the
upper b
asket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from fall‐
ing onto the dishes in the lower basket.