Operation Manual

Programme options
54
EcoStart
The EcoStart function
allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option you must set up to three
electricity tariff time zones (see "Set‐
tings menu, EcoStart").
You then set the latest time at which the
programme selected should end.
The dishwasher will start automatically
in the cheapest tariff zone within the
time set.
 Use the  arr
ow buttons to set the
hour and confirm with
OK.
The hours will be saved and the minute
number block will
be highlighted.
 Use the  arr
ow buttons to set the
minutes and confirm with
OK.
The estimated start time for the pro‐
gr
amme selected will appear in the dis‐
play.
The Start indicator light will come on.
 Clo
se the door.
The selected programme will start auto‐
matically during the most cost effective
time zone
. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
pr
ogramme before the start time in the
display is reached.
 Open the doo
r.
 P
ress the  button.
 Use the arr
ow buttons  to select
the setting you want to change and
confirm with
OK.
 Use the arr
ow buttons  to select
the Change or Delete function and
confirm with
OK.
After confirming the Change function
you can change the set time.
After confirming the Delete function, the
pr
ogramme duration will appear in the
display for the selected programme.
The  indicator light will go out and the
indicator light for the selected pro‐
gramme will come on.
 Start the programme by closing the
door.