Operation Manual

Settings menu
89
Rinse aid
You can adjust the rinse aid dosage for
best r
esults.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
If the "Adjust Sensor wash" programme
function (depending on model) has
been activat
ed, the amount of rinse aid
dispensed in the
Sensor wash p
ro‐
gramme can be higher than that set.
If spots appear on crockery and glass‐
war
e:
– Increase the rinse aid dosage.
If clouding or smearing appears on
cr
ockery and glassware:
– Decrease the rinse aid dosage.
 Select the setting you want and con‐
firm your choice with OK.
Consumption (EcoFeedback)
You can programme the dishwasher so
that the ener
gy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the to‐
tal energy and water used in all previ‐
ous dishwasher programmes (see "Car‐
ing for the environment, EcoFeedback
consumption indicator").
Consumption indicator
 Select the (Consumption) Display op‐
tion and confirm with OK.
 Select the setting you want and con‐
firm with
OK.
Total consumption
 Select the Total consumption option
and confirm with
OK.
 Y
ou can call up the values for Energy
and Water with the  arrow but‐
tons.
You can also reset the values for the to‐
tal con
sumption to 0.
 Select the Reset option and confirm
with OK.
 Select the Yes option and confirm
with OK.
 Confirm the message with OK.
The values are now reset to 0.