Operation Manual

Settings menu
92
Sensor wash
You can adjust the Sensor wash
pro‐
gramme so that it will remove stubborn
soling in a lightly soiled load.
 Select the setting you want and con‐
firm with OK.
AutoOpen
At the end of programmes with a drying
phase (e
xcept Extra quiet) the door will
open automatically a little in order to
help the drying process (see "Pro‐
gramme chart").
In the
ECO p
rogramme (depending on
mode) the door will open automatically
during the drying phase.
This function can be deactivated if
wished.
 Select the setting you want and con‐
firm with OK.
 I
f you have deactivated the auto‐
matic door opening function and
would like to open the door as soon
as the programme has finished make
sure that you open the door fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
worktop because the fan is no longer
running.
BrilliantLight
This dishwasher has interior lighting.
When the door is open the lighting will
switch off aut
omatically after 15 mi‐
nutes.
You can also switch off the interior
lig
hting permanently.
 Select the setting you want and con‐
firm with OK.
Optimise standby
The dishwasher is supplied with the Op-
timise standby
function set as standard.
To save energy the dishwasher will
switch off aut
omatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you pr
efer. If you do this the duration
before the dishwasher switches off in‐
creases to 6 hours. Doing this will in‐
crease energy consumption.
 Select the setting you want and con‐
firm with OK.