Operation Manual
Table Of Contents
- Contents
- Guide to the appliance
- Warning and Safety instructions
- Caring for the environment
- Before using for the first time
- Loading the dishwasher
- Operation
- Programme options
- Programme chart
- Cleaning and care
- Problem solving guide
- Maintenance
- After sales service
- Optional accessories
- Electrical connection
- Plumbing
- Technical data
- Settings menu
- Settings menu for changing standard settings
- To open the Settings menu
- Language
- Time
- Water hardness
- Rinse aid
- Consumption (EcoFeedback)
- EcoStart
- Sensor wash
- AutoOpen
- BrilliantLight
- Optimise standby
- Refill reminders
- Check filters
- Soak
- Pre-wash
- Brightness
- Volume
- Memory
- Version info
- Showroom programme
- Factory default
- To close the Settings menu

Before using for the first time
28
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds ap‐
pr
ox. 110 ml.
Close the flap firmly so that it clicks
int
o place. Otherwise water can enter
the rinse aid reservoir during a pro‐
gramme.
W
ipe up any spilled rinse aid. This
prevents over-foaming occurring dur‐
ing the next programme.
You can adjust the rinse aid dosage
for best r
esults (see "Settings menu,
Rinse aid").
Add rinse aid reminder
When the Add rinse aid message ap‐
pears, the r
eservoir contains sufficient
rinse aid for 2 - 3 programmes only.
Add rinse aid in plenty of time.
Confirm with OK.
The refill reminder will go out.
If you only ever use combination prod‐
ucts containing salt and rinse aid in
your dishwasher
, you can switch both
reminders off if you wish (see "Set‐
tings menu - Refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is impor
tant to remember to add salt
and rinse aid and to switch the re‐
minders back on.