Operation Manual
Table Of Contents
- Contents
- Guide to the appliance
- Warning and Safety instructions
- Caring for the environment
- Before using for the first time
- Loading the dishwasher
- Operation
- Programme options
- Programme chart
- Cleaning and care
- Problem solving guide
- Maintenance
- After sales service
- Optional accessories
- Electrical connection
- Plumbing
- Technical data
- Settings menu
- Settings menu for changing standard settings
- To open the Settings menu
- Language
- Time
- Water hardness
- Rinse aid
- Consumption (EcoFeedback)
- EcoStart
- Sensor wash
- AutoOpen
- BrilliantLight
- Optimise standby
- Refill reminders
- Check filters
- Soak
- Pre-wash
- Brightness
- Volume
- Memory
- Version info
- Showroom programme
- Factory default
- To close the Settings menu

Cleaning and care
65
Cleaning the spray arms
Particles of food can get stuck in the
spr
ay arm jets and bearings. The spray
arms should therefore be inspected and
cleaned regularly (approx. every 4 - 6
months).
Switch the dishwasher off.
Remove the spray arms as follows:
T
ake out the cutlery tray (if your dish‐
washer is fitted with one).
P
ush the top spray arm upwards to
engage the inner ratchet. Then un‐
screw the spray arm.
P
ush the middle spray arm upwards
to engage the ratchet. Then un‐
screw the spray arm .
Remo
ve the lower basket.
P
ull the lower spray arm firmly up‐
wards to remove it.
Use a point
ed object to push food
particles into the spray arm jets.
Rin
se thoroughly under running wa‐
ter.
Replace
the spray arms and check
that they rotate freely.