Operating Instructions Dishwasher To prevent accidents and machine damage, read these instructions be‐ fore installation or use. en-US HG05 M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS................................................................. 5 Guide to the dishwasher ..................................................................................... 14 Appliance overview................................................................................................ 14 Control panel.......................................................................................................... 15 Display functions...................................
Contents At the end of the program...................................................................................... 47 Turning off .............................................................................................................. 48 Unloading the dishwasher ..................................................................................... 48 Interrupting a program ........................................................................................... 49 Changing a program ...........
Contents Frequently Asked Questions ............................................................................... 71 Technical problems ................................................................................................ 71 Water intake fault ................................................................................................... 75 Water drainage fault............................................................................................... 76 General problems.................
IMPORTANT SAFETY INSTRUCTIONS This dishwasher complies with current safety requirements. Inap‐ propriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the dishwasher, please read the installation plan and the operating instructions carefully before it is installed and used for the first time. They con‐ tain important information on its installation, safety, use and main‐ tenance.
IMPORTANT SAFETY INSTRUCTIONS Correct use This dishwasher is intended for use in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. It must only be used as specified in these operating instructions for cleaning domestic dishware and cutlery. Any other usage is not supported by the manufacturer and could be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the appliance unless they are constantly supervised. Children should be supervised to ensure that they do not play with the appliance. Keep small children away from the appliance at all times to avoid the risk of injury. There is the risk that children may lock themselves in the dishwasher.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair, and maintenance work should only be per‐ formed by a Miele-authorized service technician. Work by unquali‐ fied persons could be dangerous and may void the warranty. Before installation, check the dishwasher for visible signs of dam‐ age. Under no circumstances should you use a damaged dishwash‐ er. A damaged dishwasher could be dangerous.
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and frequen‐ cy) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt. Do not connect the dishwasher to the electrical supply until it has been fully installed and any adjustment has been made to the door springs.
IMPORTANT SAFETY INSTRUCTIONS The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele-authorized service technician. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safe‐ ty of the appliance. During installation, maintenance and repair work, the appliance must be disconnected from the electrical supply (turn it off and with‐ draw the plug from the socket).
IMPORTANT SAFETY INSTRUCTIONS Proper installation The dishwasher must be installed and connected in compliance with the installation plan. Be careful when installing the dishwasher. Wear protective gloves to avoid injury on any sharp metal components. The dishwasher must be correctly aligned horizontally to ensure problem-free operation.
IMPORTANT SAFETY INSTRUCTIONS Proper use Do not use solvents in the dishwasher. Danger of explosion! Do not inhale or ingest powder detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or in‐ haled. Avoid leaving the door open unnecessarily as someone could trip over it and be injured by it.
IMPORTANT SAFETY INSTRUCTIONS In an appliance with a cutlery basket (depending on model), cut‐ lery is cleaned and dried more efficiently if placed in the basket with the handles downwards. However, to avoid the risk of injury, place knives and forks with the handles upwards. Plastic items which cannot withstand being washed in hot water, such as disposable plastic containers or plastic cutlery should not be cleaned in the dishwasher.
Guide to the dishwasher Appliance overview a Upper spray arm (not visible) g Filter system b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dis‐ penser e Air intake for drying (depending on model) f Lower spray arm 14 k Optical Interface l Reservoir for dishwasher salt
Guide to the dishwasher Control panel a Optical Interface f OK button b Program selection g Display c Option buttons with indicator lights h Program selection button d Arrow buttons i (On/Off) Button e button - FlexiTimer with indicator light These operating instructions apply to several different dishwasher models with different heights. The specific dishwasher models are referred to as follows: Standard = 31 11/16" (80.5 cm) high dishwashers (integrated) and 33 1/4" (84.
Guide to the dishwasher Display functions Settings menu General information The display is used to select or set the following: – The program – The FlexiTimer (Delay Start) – The Settings menu The display can show the following: – The program stage – The estimated time left for the pro‐ gram to run – Any relevant fault messages and in‐ formation To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time.
Caring for the environment Disposal of packaging material Energy-saving dishwashing The cardboard box and packaging pro‐ tect the appliance during shipping. These materials are biodegradable and recyclable. Please recycle. This dishwasher is economical in the use of water and electricity. For best re‐ sults follow these tips: Disposal of your old appliance Old appliances may contain materials that can be recycled.
Before using for the first time Opening the door This dishwasher has a motorized door opener which is activated by knocking on the door front ("Knock2Open func‐ tion"). Water in the dishwasher may be hot. Danger of scalding! Only open the door during operation if absolutely necessary and exercise extreme caution when doing so. Keep the area around the door free of obstructions.
Before using for the first time Emergency door opener If the door will not open when knocked or if there is a power failure, the door can be opened manually with the emer‐ gency door opener supplied with the dishwasher. Then use it to pull the door open. Closing the door Push the baskets in. Push the emergency door opener into the gap between the dishwasher front and the neighboring unit door about 5 7/8" (15 cm) below the coun‐ ter .
Before using for the first time Basic settings Time of day Open the door. The display will then change to the screen for setting the time. Turn the dishwasher on with the button. The welcome screen will appear when the dishwasher is turned on for the first time. Language The display will change automatically to the screen for setting the language. Use the arrow sensors to select the language you want and also the country, if appropriate, and confirm your selection with OK.
Before using for the first time Water hardness The display changes to the water hard‐ ness setting. – The dishwasher must be program‐ med for the water hardness in your area. – Your local water supplier can tell you the water hardness level in your area. – Where the water hardness fluctuates e.g. between 10 - 16 gr/gal (10 - 15 °d), always program the dishwasher to the higher value (16 gr/gal or 15 °d in this example).
Before using for the first time Before using the appliance for the first time, you require: – Approx. 2 qt (2 l) of water – Approx. 2 kg (4 lbs) of dishwasher salt – Domestic dishwasher detergent – Rinse aid formulated for domestic dishwashers Every dishwasher is tested at the fac‐ tory. There will be residual water in the appliance from this test. It is not an in‐ dication that it has been used previ‐ ously.
Before using for the first time Filling the salt reservoir Important! Before filling the salt res‐ ervoir with dishwasher salt for the first time, you must fill it with approx. 2 qt (2 l) of water to enable the salt to dissolve. Once the dishwasher has been used for the first time, there is always suf‐ ficient water in the reservoir. Remove the lower basket and un‐ screw the salt reservoir cap. Water will run out of the reservoir when the cap is removed.
Before using for the first time Salt refill indicator Fill the salt reservoir with dishwasher salt for reactivation when Refill salt appears in the display (If it appears during a program, wait until the end of the program). Confirm with OK. The salt refill indicator will go out. Risk of corrosion! Immediately after filling the salt res‐ ervoir, run the Express program with the Short program option selected and without any dishware in the dishwasher to remove any traces of salt from the cabinet.
Before using for the first time Rinse aid Adding rinse aid Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the res‐ ervoir. When using "Tab" detergents rinse aid is not needed.
Before using for the first time Rinse aid indicator When the Refill rinse aid message ap‐ pears in the display, the reservoir con‐ tains sufficient rinse aid for 2 - 3 pro‐ grams only. Add rinse aid. Confirm with OK. The rinse aid refill indicator will go out. Add rinse aid only until it is visible in the opening. The rinse aid reservoir holds approx. 3.7 oz. (110 ml). Close the flap firmly so that it clicks into place. Otherwise water can enter the rinse aid reservoir during a pro‐ gram.
Loading the dishwasher Tips Remove coarse food residues from the dishware. There is no need to rinse items under running water! Do not wash items soiled with ash, sand, wax, grease, or paint in the dishwasher. These will damage the dishwasher. Dishware can be loaded anywhere in the baskets, but the following notes should be observed: – Do not place dishes or cutlery inside other pieces. They will cover each other. – Make sure that small items cannot fall through the holders in the bas‐ kets.
Loading the dishwasher Items not recommended for dish‐ washing – Wooden cutlery, cutting boards and dishware or items with wooden parts – Craft items, antiques, valuable vases, and decorative glassware – Plastic items which are not heat-re‐ sistant: the high temperatures in the dishwasher may cause them to melt or lose shape. – Copper, brass, tin and aluminum items may discolor or become matt. – Colors painted over a glaze may fade after a number of washes.
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray (depending on model) 29
Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Cutlery tray (depending on model) 30 Lower basket
Loading the dishwasher Loading for 10 standard place settings with cutlery basket Upper basket Lower basket Cutlery basket 31
Loading the dishwasher Loading for 13 standard place settings with cutlery basket Upper basket Cutlery basket 32 Lower basket
Loading the dishwasher Upper basket For safety reasons, do not oper‐ ate the dishwasher without the upper and lower baskets in place (except when running the Tall items program, if available). Adjustable cup rack (depending on model) Raise the rack to make room for tall items. Glasses can be arranged along the po‐ sitioning rail of the cup rack to give them some support during the pro‐ gram. Lower the cup rack and lean the glasses against it, or double stack smaller pieces.
Loading the dishwasher XXL cup rack (depending on model) The cup rack can be set at two different widths so that it can also accommodate large cups. You can also move one of the side in‐ serts of the cutlery tray to make more room for tall glasses. Adjusting the height You can set the glassware rack at two different heights. Pull the cup rack upwards and click it back into position at the required width. Glassware rack Pull the rail upwards and click it back into position at the required height.
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller items the upper basket can be adjusted on three levels with 3/4" (2 cm) be‐ tween each level. The upper basket can also be set at an angle with one side high and the other side low. Make sure, however, that the basket can slide smoothly in and out of the cabinet. Pull the upper basket out.
Loading the dishwasher Lower basket Removable MultiComfort insert The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans. You can remove the MultiComfort insert to make more room for larger items such as casserole dishes. Removing the insert Pull the yellow handle forwards and remove the insert. Refitting the insert For larger and heavier items such as plates, serving platters, saucepans, bowls, etc.
Loading the dishwasher Glass rack Glassware rack The glass rack can be raised to make more room for tall items. This rail is designed to hold glasses with long stems securely. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it. You can set the glass rack at two differ‐ ent heights. Lower the rail and lean tall glasses against it. Slide the glass rack to the desired height until the catches click into place at the top.
Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for washing plates, soup bowls, platters, dessert bowls, and saucers. The bottle holder can be used to wash narrow items, e.g., milk and baby bot‐ tles. The spikes can be lowered to make more room for large items, e.g. pots, pans and dishes. If the bottle holder is not needed, lift it up and fold the sides down , as illustrated. Press the yellow lever downwards , and then lower the spikes .
Loading the dishwasher Grates and filters You can also wash Miele grates, the Miele griddle plate, and Miele range hood filters. Select the Grates & Filters program for optimum dishwashing results. Protruding parts can damage the dishwasher. Load the dishwasher in such a way that no corners protrude over the side of the basket. Grates Rust damages the dishwasher. Wash only grates that are undam‐ aged and not rusty. Place the upper basket in the top po‐ sition.
Loading the dishwasher Griddle plate Filters Load the griddle plate in the bottom basket. To do so. fold over the front row of spikes. You can wash two range hood filters in the upper basket and two in the bottom basket at once. If you only want to wash two filters, put them in the upper basket. Arrange the griddle plate with the grilling surface facing upwards to guarantee better drying. Upper basket Lower basket Be careful when unloading the filters.
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Spoon heads should be placed in con‐ tact with at least one of the serrated re‐ tainers on the base of the cutlery tray to ensure that water runs off them freely. The upper spray arm must not be blocked by items which are too big.
Loading the dishwasher Cutlery basket (depending on model) The cutlery basket can be placed any‐ where on the front rows of spikes in the lower basket. Fit it onto the cutlery basket if re‐ quired. To avoid the risk of injury, knives and forks should be placed with the han‐ dles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and dri‐ er. Place small items of cutlery in the in‐ dividual slots on three sides of the cutlery basket.
Operation Detergent Only use detergents formulated for domestic dishwashers. Refer to the manufacturer's packaging as to whether Tab products are suitable for the water hardness level in your area. Please note that the cleaning and dry‐ ing results of Tab detergents can vary greatly. For optimum cleaning and drying re‐ sults, use Miele dishwasher detergent and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ ries.
Operation Adding detergent Press the opening catch on the de‐ tergent dispenser. The flap will spring open. The flap is always open at the end of a program. Add the required amount of detergent and close the flap. Make sure that the detergent packag‐ ing is properly closed after use to avoid it getting damp and becoming lumpy. Dispensing aid Compartment I holds a maximum of 2 teaspoons (10 ml), Compartment II holds a maximum of 3.5 tablespoons (50 ml) of detergent.
Operation Turning on Selecting a program Turn on the water supply if it is turned off. Choose your program according to the type of load and the degree of soiling. Open the door. The different programs and their uses are described in the Program Over‐ view chapter. Make sure the spray arms are not ob‐ structed. Press the button for at least 2 sec‐ onds. The program selected will appear briefly in the display and the appropriate indi‐ cator light will come on.
Operation Starting a program Time display Start the program by closing the door within four seconds of the last press of a button. The estimated duration of the program selected appears in hours and minutes in the display before the program be‐ gins. During the program, the time left until the end of the program is dis‐ played. The program will begin. The Optical Interface comes on to show that a program has been started.
Operation Energy management At the end of the program To save energy, the dishwasher will switch off automatically 10 minutes af‐ ter the last time a button has been pressed or after the end of the program (see "Settings menu - Optimize stand‐ by"). At the end of a program, the Optical In‐ terface will be visible flashing slowly with the door shut. The buzzer might al‐ so be sounding. Press the button to switch the dishwasher back on.
Operation Turning off Unloading the dishwasher At the end of a program: Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comforta‐ ble enough to handle before unloading them. Open the door. The dishwasher can be switched off at any time using the button. Turning the dishwasher off during a pro‐ gram stops the program. Turning the dishwasher off during the run-up to a delay start time (FlexiTimer) will also stop the process.
Operation Interrupting a program The program will be interrupted as soon as you open the door. After four seconds, the indicator light of the selected program will flash and the message Continue with OK will appear in the display. Press the OK and close the door within four seconds. The program will continue from the point at which it was interrupted. Water in the dishwasher may be hot. Danger of scalding! Only open the door if absolutely nec‐ essary and exercise extreme caution when doing so.
Options Options You can select and deselect the options using the appropriate buttons and the display. Open the door. Turn the dishwasher on with the button. The indicator light next to the program selected will come on. Select a program. Press the button for the option you want. The indicator light for the relevant but‐ ton will come on if the option is availa‐ ble for the program selected.
Options FlexiTimer with EcoStart The FlexiTimer gives you three ways of starting the program by means of de‐ laying the start. You can set the start time or the finish time of a program. You also have the option of taking ad‐ vantage of time variable economy rates of electricity using the EcoStart function. When using the delay start function, make sure that the detergent com‐ partment is dry before adding deter‐ gent. Wipe dry with a cloth if neces‐ sary.
Options Start at Finish at With the Start at function, you set the exact time at which you want the pro‐ gram to start. With the Finish at function, you set the time at which you wish the program to end. Use the arrow buttons to set the hour and confirm with OK. Use the arrow buttons to set the hour and confirm with OK. The hour will be saved and the minute number block will be highlighted. The hour will be saved and the minute number block will be highlighted.
Options EcoStart Changing or deleting set times The EcoStart function allows you to take advantage of time variable economy rates of electricity. Before you can use this option, you must set up to three electricity rate time zones (see "Settings menu - EcoStart"). You then set the latest time at which the program selected should end. The dishwasher will start automatically in the cheapest rate zone within the time set.
Program overview Program When to use Program sequence Prewash Main wash Interim rinse Final rinse Drying Normal Program for regular use to completely wash a full load of normally soiled dish‐ ware with the ability to ad‐ just energy and water con‐ sumption based on the soil load of the dishware. If re‐ quired X If re‐ quired X X Pots & Pans For heavily soiled dishware and normally soiled pots, pans and utensils with dried on residue; use 20% more detergent than rec‐ ommended.
Program overview Program When to use Program sequence Prewash Main wash Interim rinse Final rinse Drying Extra Quiet Extra quiet program for mixed loads with standard, slightly dried-on food resi‐ due with a longer program duration. X X X X Economy Water and energy saving program for standard dish‐ ware soiling that has not dried on, with a long soak‐ ing time and a low temper‐ ature. X X X X Energy Saver Program for the sole use of hot water with a minimum of 45°C / 120°F.
Settings menu Adjusting default values Opening the Settings menu Open the door. Switch the dishwasher off with the button if it is switched on. Press and hold the OK button. Switch the dishwasher on with the button. Release this button as soon as the background lighting lights up in the display. Keep the OK button pressed for at least 4 seconds. The first option in the Settings menu will appear in the display. To learn about the display, read the section with the same name.
Settings menu Language Time of day The display can be set to appear in one of several different languages. You can select either a 24-hour or 12hour clock. You can change the language in the display via the Language sub-menu. The current time of day must be set be‐ fore you can use the "FlexiTimer" pro‐ gram option. Select the language you want as well as the country, if appropriate, and confirm with OK.
Settings menu Water hardness °d gr/gal °f Display This appliance is fitted with a water softener. The dishwasher must be programmed for the water hardness in your area. 11 11 20 11 12 13 22 12 13 14 23 13 14 15 25 14 15 16 27 15 16 17 29 16 – Your local water supplier can tell you the water hardness level in your area. 17 18 31 17 18 19 32 18 – Where the water hardness fluctuates e.g.
Settings menu Rinse aid EcoStart You can adjust the rinse aid dosage for best results. The rinse aid dosage is set in stages from 0 to 6. It is set to 3 at the factory. In order to run your dishwasher in the most economical way, you can use the EcoStart option to take advantage of your electricity supplier's time variable rates (see "Options - FlexiTimer with EcoStart"). With this option selected, your dish‐ washer will start automatically at your electricity supplier's cheapest rate times.
Settings menu Setting the electricity rate times Changing the electricity rate times Before you can use the EcoStart option, you must set at least one electricity rate time. You can change the start, finish or pri‐ ority of an electricity rate time. Use the arrow buttons to select the electricity rate time (R1-R3) you want to set and confirm with OK. The start of the electricity rate time se‐ lected will appear in the display and the hour number block will be highlighted.
Settings menu Deleting the electricity rate times AutoOpen You can delete the settings for an electricity rate time and in doing so deactivate the EcoStart option for this time zone. At the end of programs with a drying phase (except Extra Quiet) the door will open automatically a little in order to help the drying process (see "Program overview"). In the ECO program (depending on mode), the door will open automatically during the drying phase.
Settings menu Knock2Open Optimize Standby You can choose whether the door should open with 1 or 2 knocks. The dishwasher is supplied with the Optimize standby function switched on as standard. Select the setting you want and con‐ firm with OK. This function can also be disabled, in which case the door has to be fitted with a handle to open it. BrilliantLight This dishwasher has interior lighting. When the door is open, the lighting will switch off automatically after 15 mi‐ nutes.
Settings menu Refill indicators Check filters If you consistently use a Tab detergent and the refill indicators for salt and rinse aid are bothering you, you can deacti‐ vate them if you wish. You can adjust the interval at which the message to remind you to check the fil‐ ters appears. You can set an interval between 30 and 60 program cycles. Select the setting you want and con‐ firm with OK.
Settings menu Pre-Rinse Volume You can use this function to remove easily loosened food residues in the program selected. Once activated, this function will be carried out with all programs until you deactivate it. A sequence of buzzer tones will sound at the end of the program or if there is a fault as long as the buzzer has been ac‐ tivated. Select the setting you want and con‐ firm with OK. Brightness There are seven different display bright‐ ness settings.
Settings menu Version info Factory default settings You can call the electronic software ver‐ sion of your dishwasher for technical support purposes. You can reset all settings to the factory default settings. Confirm the display with OK. Showroom program For demonstration purposes only. The dishwasher is fitted with various demonstration programs for showroom use. – – Demo mode Select Reset and confirm with OK. Closing the Settings menu You can exit the Settings menu using Close.
Cleaning and care Check and clean your dishwasher regularly. This will help avoid prob‐ lems and faults. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolor all surfa‐ ces. Cleaning the wash cabinet Generally, the wash cabinet is self cleaning if the correct amount of deter‐ gent is used. If, however, there are lime scale or grease deposits in the cabinet, these can be removed with a special dish‐ washer cleaner (see "Optional accesso‐ ries").
Cleaning and care Cleaning the door front If soiling remains longer, it may happen that the surfaces can be‐ come discolored or changed. Remove any soiling immediately. Clean the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge. Wipe the surfaces dry using a soft cloth. Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface. Remove the cleaner promptly.
Cleaning and care Filter system Filter system The filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects. Turn the dishwasher off. This dishwasher must not be used without all the filters in place! Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use.
Cleaning and care To clean the inside of the filter, the flap must be opened: Press catches together in the di‐ rection of the arrows as shown, and open the filter . Rinse all the filters under running wa‐ ter. Then close the flap so that the catch engages. Replace the filter system so that it lies flat in the base of the wash cabi‐ net. Then turn the handle clockwise until both arrows point towards each oth‐ er. This will lock the filter system in place.
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Turn the dishwasher off. Remove the spray arms as follows: Take out the cutlery tray (if your dish‐ washer is fitted with one). Push the top spray arm upwards to engage the inner ratchet. Then un‐ screw the spray arm. Pull the lower spray arm firmly up‐ wards to remove it.
Frequently Asked Questions With the help of the following guide, minor faults in the performance of the appli‐ ance, some of which may result from incorrect operation, can be put right without contacting Miele Service. This will save time and money. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: Unauthorized or incorrect repairs could cause personal injury or damage to the appliance.
Frequently Asked Questions Problem Possible cause and solution The door locking pins do not retract after the door has opened auto‐ matically. There is a fault with the door mechanism or the door has not been correctly balanced. Contact Miele Service. The AutoOpen function must be switched off be‐ fore the dishwasher is used again (see "Settings AutoOpen"). Danger of injury in the unlikely event of another fault.
Frequently Asked Questions Problem Possible cause and solution The Optical Interface is Before fixing the fault: flashing quickly. Turn the dishwasher off with the button. The buzzer is sounding. One of the following faults appears in the display: Fault FXX There may be a technical fault. After a few seconds: Turn the dishwasher back on. Select the desired program. Close the door. If the error message is displayed again, there is a technical fault. Contact Miele Service.
Frequently Asked Questions Problem Possible cause and solution The Optical Interface is Before fixing the fault: flashing quickly. Turn the dishwasher off with the button. The buzzer is sounding. One of the following faults appears in the display: Fault F33 The door is sometimes obstructed by an item inside the appliance. If this is the case, remove the item and switch the dishwasher on again. If the same message appears again, contact Miele Service.
Frequently Asked Questions Water intake fault Problem Possible cause and solution The Optical Interface is flashing quickly. The buzzer is sounding. One of the following faults appears in the display: Open water supply The water supply is turned off. Turn on the water supply all the way. Intake Before fixing the fault: Turn the dishwasher off with the button. There is a problem with the water intake. Turn on the water supply fully and start the pro‐ gram again.
Frequently Asked Questions Water drainage fault Problem Possible cause and solution The Optical Interface is flashing quickly. The buzzer is sounding. The following fault ap‐ pears in the display: Drain Before fixing the fault: Turn the dishwasher off with the button. 76 There is a problem with the water intake. There might be water in the wash cabinet. Clean the filter system (see "Cleaning and care Filter system"). Clean the drain pump (see "Frequently asked questions").
Frequently Asked Questions General problems Problem Possible cause and solution The door will not open when knocked. The Knock2open function has been disabled. Switch the door opening mechanism on again (see "Settings menu - Knock2Open"). If the door will still not open or if there is a power fail‐ ure, the door can still be opened with the door open‐ ing device supplied (see "Before using for the first time - Emergency door opener").
Frequently Asked Questions Problem Possible cause and solution Water remains in the Before fixing the fault: wash cabinet at the end Turn the dishwasher off with the button. of a program. The filter system in the wash cabinet is clogged. Clean the filter system (see "Cleaning and care Filter system"). The drain pump or non-return valve is blocked. Clean the drain pump or the non-return valve (see "Frequently asked questions"). The drain hose is kinked. Remove the kink.
Frequently Asked Questions Noises Problem Possible cause and solution There is a knocking noise in the wash cabi‐ net. A spray arm is hitting the dishware. Interrupt the program, and rearrange the items which are obstructing the spray arm. There is a rattling noise in the wash cabinet. Dishware is moving around in the wash cabinet. Interrupt the program and rearrange loose pieces. A foreign object (e.g., a cherry pit) has become lodged in the drain pump.
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishes are not clean. The dishes were not loaded correctly. See notes in "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program overview"). Not enough detergent was dispensed. Use more detergent, or change your detergent. Items are blocking the path of the spray arms. Rearrange the items so that the spray arms can rotate freely.
Frequently Asked Questions Problem Possible cause and solution Dishware is not dry or cutlery and glasses are spotty. The rinse aid dosage is set too low or the rinse aid reservoir is empty. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see "Before using for the first time - Rinse aid"). Dishware was taken out of the cabinet too soon. Leave it in for longer (see "Operation"). Combination tabs have been used which have im‐ paired drying performance.
Frequently Asked Questions Problem Possible cause and solution White residue is visible The rinse aid dosage is too low. on dishware and cut‐ Increase the dosage (see "Settings menu - Rinse lery, clouding occurs on aid"). glassware; this film can The salt reservoir is empty. be wiped off. Fill the salt reservoir (see "Before using for the first time - Dishwasher salt"). The salt reservoir cap has not been screwed on cor‐ rectly. Replace it, making sure that it screws back on correctly.
Frequently asked questions Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Turn off the dishwasher and pull the plug. Take the filter system out of the wash cabinet (see "Cleaning and care Cleaning the filters"). Scoop the water out of the cabinet using a suitable container or utensil. The drain pump is beneath the non-re‐ turn valve (see arrow).
Customer service Repairs Warranty For problems that you cannot resolve on your own, please contact: For more information, please refer to the included warranty. – your Miele dealer or MieleCare (USA only) – Miele Service The telephone number for Miele is listed at the back of these instruc‐ tions. In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet.
Optional accessories Dishwasher detergent and rinse aid, as well as cleaning and care products, are available as optional accessories. All the products are designed for use with Miele dishwashers. These and many other useful products can be ordered via the Miele website or from Miele (see end of this manual for contact details). Dishwasher detergent, rinse aid, and salt When you decided to buy a Miele dish‐ washer, you chose excellent quality and performance.
Optional accessories Dishwasher care products Accessories Miele cleaning and care products pro‐ vide optimum care for your dishwasher. Some accessories may be supplied as standard, depending on model. Dishwasher cleaner Cappuccinatore insert – Cleans the dishwasher effectively and thoroughly The Cappuccinatore insert can be used for cleaning the individual parts of the Miele Cappuccinatore in the dishwash‐ er.
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Electrical connection Installation, repairs and other work by unqualified persons could be dangerous. Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply. The power outlet must be accessible after installation. Do not use an ex‐ tension cord to connect the dish‐ washer to the mains. Danger of over‐ heating! See data plate on the right side of the door. A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician.
Electrical connection Hardwired electrical connection It is possible to hardwire this appliance to an existing power cable. CAUTION: Before servicing, discon‐ nect the power supply by either re‐ moving the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all ap‐ plicable codes and standards.
Water connection Connection to the water sup‐ ply Water in the dishwasher must not be used as drinking water. – The dishwasher may be connected to a cold or hot water supply up to a maximum of 140°F/60°C. We would only recommend connec‐ tion to a hot water supply if it is eco‐ nomical, e.g. a solar-powered supply. When connected to a hot water sup‐ ply, all program stages which would otherwise be carried out with cold water will be carried out with hot wa‐ ter.
Water connection Drainage – The machine comes equipped with a built-in non-return valve on the dis‐ charge side to prevent waste water from flowing back into the dishwash‐ er. – Take the drain line of the dishwasher and attach the drain line as high as possible under the counter rim of the kitchen sink before connecting the end to the drain. The loop will serve to prevent a backed up drain or large volume of water in the sink from si‐ phoning back into the dishwasher.
Sound emission testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal pro‐ gram. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. Secure the front panel.
Sound emission testing Push the provided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet . Push the toe-kick into place in such a way that it is flush with the door front .
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Push the insulating strip into the front top edge of the toe-kick .
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
G 6590 / G 6595 en-US M.-Nr.