Operating instructions

Adjust the rear leveling legs to the re-
quired height.
To raise the machine - turn clockwise.
To lower the machine - turn counter-
clockwise.
Several turns may be needed to set the
correct height. A low speed electric or
cordless screwdriver can also be used.
Adjust the front leveling legs by
pushing on the foot with a slotted
screwdriver.
Tipping the machine slightly, if
possible, will make adjusting the
front legs easier. Make sure the ma-
chine is level when adjustments are
complete.
The dishwasher should be raised until it
just touches the underside of the counter-
top.
Dishwasher installation
50