Operating instructions

5.Installing the custom
door panel.
A custom door panel matching the kit-
chen cabinetry can be installed on the
dishwasher by using the provided tem-
plates and bracket.
Length: 19" - 23 3/4" (48.3 - 60.4 cm)
Width: 23 1/2" (59.8 cm)
Note: The maximum panel length is
only applicable when no spacer bars
are used.
After panel installation, see Step 6 “Ad-
justing the door springs”.
Place a template on each end of the
bracket as shown, making sure the
rule marks face the outside of the
bracket.
Hang the bracket on the machine
door.
Slide the top edge of the templates
under the spacer bars and control
panel.
Dishwasher installation
53