Operation Manual

Salt indicator
The salt indicator light comes on to not-
ify you that the reservoir is empty.
The reservoir should then be refilled
with dishwasher salt for reactivation.
( See: Filling the salt reservoir)
After the reservoir has been filled, the
water softener is automatically reacti-
vated the next time the dishwasher is
run. The salt indicator light may still be
illuminated during this process. It will
go out once the salt concentration has
reached the correct level.
Note
The salt indicator light will also come
on if the water used is very soft (below
4 °d / 0.7 mmol). In this case the reser-
voir should not be filled with salt. The in-
dicator light will remain lit and should
be ignored.
(See “After sales service” for definition
of “PC”).
Before using for the first time
17