Operation Manual

Problem solving guide
With the aid of the following guide, minor problems can be easily corrected with-
out calling in a Miele service technician, thus saving you both time and money.
You should, however, note the following:
Repairs should only be carried out by a suitably qualified and trained person in
accordance with local and national safety regulations. Unauthorised or incor-
rect repairs could cause personal injury or damage the machine.
Problem Possible cause Remedy
The light ring around
the programme selector
and the decimal point in
the time display do not
light up, after the ma-
chine has been
switched on using the
“On/Off” button
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
has tripped.
Replace the fuse
(U.K. fuse rating = 13 A).
The dishwasher stops
during a programme
The fuse has tripped. Replace the fuse
( U.K. fuse rating = 13 A).
The “Spray arm” indica-
tor light is flashing
Tall items are blocking
the path of the middle
spray arm.
Open the door and
rearrange items which are
blocking the spray arm.
The middle spray arm
jets are blocked.
Before rectifying the
problem you must:
– Turn the Programme
selector to the “Stop”
position,
– Switch the dishwasher
off with the “On/Off”
button,
then:
– Clean the spray arm.
Problem solving guide
45