Operation Manual

Problem Possible cause Remedy
The indicator light
“Inlet/Outlet” is flashing
and the programme
does not continue
Before rectifying the
problem you must:
– Turn the programme
selector to the “Stop”
position.
– Switch the dishwasher
off using the “On/Off”
button.
Water intake is restricted. – Open the stopcock
fully.
– Check the water inlet
filter and clean if
necessary, see
“Cleaning the water
inlet filter”.
Water outlet is restricted,
water remains in the
wash cabinet at the end
of a programme.
– Clean the filter
combination, see
“Cleaning and Care”.
– Clean the drain pump,
see “Cleaning the
drain pump and non-
return valve”.
– Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
– Remove any kink in the
drain hose.
Knocking noise
in the wash cabinet
The spray arm is
knocking against an item
in the basket.
Interrupt the programme,
rearrange items which
are obstructing the spray
arms.
Rattling noise
Items of crockery are
insecure in the wash
cabinet.
Interrupt the programme,
rearrange the items of
crockery.
Problem solving guide
47