Operating instructions for dishwashers It is essential to read the operating and installation instructions before installing, commissioning or using the machine, to avoid the risk of accidents or damage to the machine. G M.-Nr.
Contents Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Appliance overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Caring for the environment . . . . .
Contents Operating the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Switching on . . . . . . . . .
Guide to the appliance Appliance overview 4 1 Upper spray arm (not visible) 7 Four height adjustable screw feet 2 Cutlery tray 8 Filter combination 3 Upper basket 9 Salt reservoir 4 Water feed for middle spray arm 5 Middle spray arm 6 Lower spray arm 10 Dual compartment detergent dispenser 11 Rinse aid reservoir (with dosage selector) 12 Data Plate
Guide to the appliance Control panel 13 Check/Refill indicators 19 Delay start buttons 14 Programme sequence display 20 "Top Solo" button 15 "On/Off" button 21 "Start/Stop" button 16 Programme buttons 22 Child safety lock 17 Time left / Delay start indicator lights 23 Door release 24 Ventilation outlet for drying fan 18 Time display 5
Warning and Safety instructions Installation This appliance conforms to current safety requirements. Inappropriate use can however lead to personal injury and damage to property. Read the operating instructions carefully before starting to use this appliance. This way you will prevent the risk of accidents and damage to the appliance. Keep these instructions in a safe place for future reference, and pass them on to any future user.
Warning and Safety instructions This equipment is not designed for maritime use or for use in mobile installations such as caravans, aircraft etc. However it may be suitable for such usage subject to a risk assessment of the installation being carried out by a suitably qualified engineer. A damaged machine is dangerous. Switch off at the mains and call your Miele supplier or the Miele Service Department. The plastic housing of the water connection contains an electrical component.
Warning and Safety instructions Take care on dishwashers with a visible heater element Do not touch the heating element during or directly after the end of a programme. It will be hot. Danger of burning! Some plastic items could melt or catch fire if they were to come into contact with the heating element. Therefore always place plastic items or any other items which may not be completely heat resistant in the upper basket and ensure they cannot drop down onto the heater element.
Warning and Safety instructions The Miele Waterproof System offers protection from water damage, provided the following conditions are met: – The dishwasher is correctly installed and plumbed in. – The dishwasher is properly maintained and parts are replaced where it can be seen that this is necessary. – The stopcock has been turned off when the appliance is not used for a longer period of time (e.g. during holidays).
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure that they are recycled.
Before using for the first time Before using the appliance for the first time you require: – approx. 2 litres of water, – approx. 2 kg dishwasher reactivation salt, – domestic dishwasher detergent, – rinse aid formulated for domestic dishwashers. The dishwasher is fitted with a water softener sensor. This automatically sets the water softener unit for the local water hardness level. Every dishwasher is tested at the factory. There will be residual water in the appliance from this test.
Before using for the first time To open the door Child safety lock The yellow key for the child safety lock is on one of the spikes at the front of the upper basket. Remove the key before switching on the dishwasher and keep it in a safe place away from the dishwasher. ^ Press the release catch inside the door grip and pull forward. If the door is opened during operation all functions are automatically interrupted.
Before using for the first time Filling the salt reservoir In order to achieve good cleaning results, the dishwasher needs to operate with soft water. Hard water results in the build-up of calcium deposits on crockery and in the dishwasher. Mains water with a hardness level higher than 0.7 mmol/l (4° d – German scale) needs to be softened. This takes place automatically in the integrated water softener. The water softener must be filled with dishwasher salt for reactivation.
Before using for the first time As the salt reservoir is filled, displaced water will overflow. ^ Clean any excess salt from around the reservoir opening and then screw the cap on again firmly. ^ Run the "Pre-wash" programme immediately to remove any traces of salt water from the cabinet. Salt indicator The salt indicator light comes on to notify you that the reservoir is empty. ^ The reservoir should then be refilled with dishwasher salt for reactivation. (See: Filling the salt reservoir).
Before using for the first time Rinse aid Adding rinse aid Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase. Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically. ,Inadvertently filling the rinse aid reservoir with powder or liquid dishwasher detergent always causes serious damage to the reservoir. Only pour rinse aid formulated for domestic dishwashers into the reservoir.
Before using for the first time Rinse aid indicator The Rinse aid indicator light on the fascia comes on when the rinse aid reservoir needs to be replenished. ^ Add rinse aid only until it is visible on the surface of the filter in the opening. The rinse aid reservoir holds approx. 130 ml. ^ Close the flap firmly so that it clicks into place. Otherwise water would enter the rinse aid reservoir during a programme. ^ Wipe up any spilled rinse aid.
Before using for the first time Setting the rinse aid dosage The dosage selector has settings from 1-6. It is set to "3" (3 ml) at the factory. Approx. 3 ml of rinse aid are then used per programme. This is a recommended setting. If spots appear on crockery and glassware: ^ Use a higher setting. If clouding or smearing appears on crockery and glassware: ^ Use a lower setting.
Loading the dishwasher Note ^ Remove coarse food residues from crockery. There is no need to rinse items under running water. ,Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher. Ash does not dissolve and is distributed in the wash cabinet. Wax, sand, lubricating grease and paint cause damage to the dishwasher.
Loading the dishwasher Upper basket Note for "Top Solo" If a wash programme has been selected with the additional function "Top Solo", all crockery must be loaded in the upper basket and cutlery tray. If your dishwasher has a cutlery basket then cutlery should be placed in the cutlery basket with plenty of space between items. For small, lightweight, delicate items such as cups, saucers, glasses, dessert bowls, etc. Shallow saucepans or casserole dishes can also be placed in the upper basket.
Loading the dishwasher Flap up rack Positioning rail To make room for tall items raise the rack upwards. The positioning rail can be flipped over to the middle of the basket for easy sorting and removing of crockery.
Loading the dishwasher Adjusting the upper basket In order to gain more space for taller pieces of crockery in the bottom or upper basket, the upper basket can be adjusted on three levels with 2 cm between each level. The upper basket can also be set at an angle with one side high and the other side low. Ensure however, that the basket can be inserted smoothly into the cabinet. It is best to adjust the basket before loading it.
Loading the dishwasher Lower basket Height limitation For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Glasses and small items such as saucers can also be placed in the lower basket. The stay at the front of the upper basket determines the max. height permissible for items placed in the lower basket to ensure they do not impede the movement of the middle spray arm.
Loading the dishwasher Variable inserts A variety of inserts are available for washing crockery in the lower basket. To remove an insert ^ Pull upwards by the handle to remove. To fit an insert ^ Fit the insert into the lower basket with the hooks going under the long cross piece as illustrated. ^ Press down on the handle until the insert is securely held in position.
Loading the dishwasher Hinged spike insert The spike insert is used for washing plates and saucers. ^ The hinged spike insert fits in the area marked white at the back right hand side of the bottom basket. Both sides of the rear section of the spiked insert can be lowered to make more room for large items, e.g. pots, pans and dishes. ^ Press the yellow lever downwards and then fold the spikes towards the middle of the basket.
Loading the dishwasher Vario insert The vario insert is used for washing cups, glasses, plates, bowls and pots. ^ The cup rack can be raised to make more room for tall items. ^ Stem glassware e.g. wine glasses, champagne flutes and Cognac glasses can be leaned against the cup rack or suspended from it. ^ The vario insert fits in the area marked white in the left hand side of the bottom basket. ^ To lower the cup rack first raise it slightly upwards.
Loading the dishwasher Glassware insert The glassware insert is designed for cleaning tall and long stemmed glassware. ^ Very tall glasses, e. g. tall beer glasses, can be held more securely by the vertical supports. ^ The insert for glasses can be fitted in the left or right of the bottom basket in the areas marked white in the illustration. Bottle holder The bottle holder, e.g. for milk and baby bottles, can be fitted in the lower basket in the area marked white in the illustration.
Loading the dishwasher Cutlery For best results cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.This makes unloading much easier. Spoon heads should be placed in contact with at least one of the serrated retainers on the base of the cutlery tray to ensure that water runs off them freely. Place the blades of knives and the prongs of forks between the holders. Spoons, on the other hand, should be placed with the handles between the holders.
Loading the dishwasher Items not suitable for dishwashers: – Wooden cutlery and crockery or items with wooden parts: these may discolour and fade. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher. – Craft items, antiques, valuable vases and decorative glassware are also not suitable for dishwashers. – Plastic items which are not heat resistant. The high temperatures in the dishwasher may cause them to melt or lose shape.
Operating the dishwasher Detergent ,Only use detergents formulated for domestic dishwashers. Do not use washing up liquid. ^ You can use conventional powder detergent, tablets or liquid dishwasher detergent. Refer to the dosing instructions given by the manufacturer on the packaging. ^ Put powder or liquid detergent into the dispenser compartment. ^ Detergent tablets should only be put into compartment II if this is recommended by the manufacturer.
Operating the dishwasher Adding detergent ,Avoid inhalation of powder detergents and do not ingest dishwasher detergent! Dishwasher detergents contain irritant or corrosive ingredients. They can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. Consult a doctor immediately if detergent has been swallowed or inhaled. Keep children away from detergents and from the dishwasher when the door is open. There could still be detergent residues in the cabinet.
Operating the dishwasher Programme selection "Energy Save" programme Choose your programme according to the type of load and how dirty it is. A hot water intake (temperature of the incoming water) of at least 45 °C and max. 60 °C is necessary for this programme. In most cases this will be a Universal programme or a Universal plus programme. These programmes are ideally suited to everyday mixed loads with varying degrees of soiling.
Operating the dishwasher Switching on ^ Make sure the spray arms are not obstructed. ^ Close the door. ^ Open the stopcock, if it is closed. ^ Press the On/Off button (15). All the programme button indicator lights (16) will light up and the "Start/Stop" indicator light will flash. Starting a programme ^ When selecting a programme, refer to the programme chart at the end of the operating instructions. The running time of the programme selected appears in the time display (18) in hours and minutes.
Operating the dishwasher Time display (18) At the end of a programme The running time of the programme selected shows in hours and minutes in the time display before a programme is started. During a programme the time left until the end of the programme is displayed. The "Time left" indicator light next to the time display lights up. A programme has finished when the "End" indicator light is on in the programme sequence display (14) and a 0 shows in the time display (18).
Operating the dishwasher Interrupting a programme A programme is interrupted as soon as the door is opened. If the door is closed again, the programme will continue from the point it was at before the door was opened. ,Water in the dishwasher may be hot. Danger of scalding! If you have to open the door do so very carefully. Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle.
Operating the dishwasher Additional options "Top Solo" (20) The "Top Solo" additional function is recommended when there is only a small amount of crockery and cutlery to clean. With this function the majority of the water is directed to the top and middle spray arms in the dishwasher. This means that the water jets are aimed at items in the upper basket and the cutlery tray if the dishwasher has one.
Operating the dishwasher ^ Switch the dishwasher on using the "On/Off" button (15). All the programme button indicator lights will light up and the "Start/Stop" indicator light will flash. ^ Press button (16) for the programme you want. The indicator light next to the selected programme will come on and the "Start/Stop" indicator light will flash. The running time of the programme selected appears in the time display (18) in hours and minutes, and the "Time left" indicator light comes on.
Operating the dishwasher Delay start (19) The starting time of a programme can be delayed, e.g. to benefit from economy rates of electricity. A delay start time of between 30 minutes and 24 hours can be selected. With a delay start time of between 30 minutes and 9 hours 30 minutes the delay is set in 30 minute stages. For 10 hours or more it is set in one hour stages. ^ Switch the dishwasher on using the "On/Off" button (15).
Operating the dishwasher At the end of the delay period the selected programme begins automatically. The time left for a programme to run then shows in the display, the "Delay Start" indicator light goes out and the "Time left" indicator light comes on. How the delay start time is shown in the time display: up to 59 minutes: e.g. - 30 minutes = 30 between 1 hour and 9 hours 30 minutes: e.g. 5 hours = 5.00 10 hours and over: e.g.
Operating the dishwasher Drying fan running time During the drying phase, as long as the door of the dishwasher remains closed, moist air is expelled through the ventilation outlet for the drying fan. The drying fan running time can be increased to avoid the risk of damage to a worktop fitted above the dishwasher. If this option is selected, the fan will continue to run for approx. 14 minutes after the end of a programme.
Operating the dishwasher Unloading the dishwasher ^ Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before unloading them. ^ If you open the door fully after switching off, the dishes will cool much faster. ^ First unload the lower basket, then the upper basket and cutlery tray. This will prevent water drops from the upper basket and cutlery tray from falling onto the dishes in the lower basket.
Cleaning and care Check your dishwasher regularly (approx. every 4 - 6 months). This way faults and problems can be avoided. Cleaning the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. ,The dishwasher must not be ^ Turn the handle anti-clockwise to release the filter combination. used without all the filters in place.
Cleaning and care To clean the underside of the filter, the flap must be opened: ^ Pull back the yellow clip to do this. ^ Rinse all parts under running water, using a nylon brush if necessary. ^ Then close the flap so that the clip engages. Important: After cleaning make sure that the clip has properly engaged. ^ Replace the filter combination so that it lies flat in the base of the wash cabinet. ^ Secure the filter by turning the handle in a clockwise direction.
Cleaning and care Cleaning the spray arms ^ Remove the lower basket. Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). ^ Switch the dishwasher off beforehand. Remove the spray arms as follows: ^ Take out the cutlery tray. ^ Press the top spray arm upwards to engage the inner ratchet. Then unscrew the spray arm. ^ Lift up the middle spray arm b to engage the ratchet.
Cleaning and care Cleaning the wash cabinet The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. If, however, there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner. Cleaning the door and the door seal ^ Wipe the door seals regularly with a damp cloth to remove food deposits. ^ When the dishwasher is being loaded food and drink residue may drip onto the sides of the dishwasher door.
Cleaning and care Wood door front panels: ^ Door fronts made from wood should only be cleaned using a damp chamois leather and then dried with a soft cloth. ,Do not use any cleaning agents containing ammonia or thinners. These would damage the surface structure. E-Cloth: A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, Part number 98013530, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals.
Problem solving guide With the aid of the following guide, minor problems can be easily corrected without calling in a Miele service technician, saving you both time and money. You should, however, note the following: ,Repairs should only be carried out by a suitably qualified and trained person in accordance with local and national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage the appliance.
Problem solving guide Problem Possible cause The indicator light The stopcock is closed. "Water inlet" lights up The water inlet filter is and flashes alternately blocked. The indicator light "Water inlet" lights up during the "Energy save" programme. Remedy Open the stopcock fully. Before rectifying the problem you must: – Press the "Start/Stop" button for at least one second. All the programme button indicator lights will light up. – Switch the dishwasher off using the "On/Off" button.
Problem solving guide Problem Possible cause Remedy Before rectifying the problem you must: – Press the "Start/Stop" button for at least one second. The indicator light "Water inlet" is flashing and the programme does not continue. All the programme button indicator lights will light up. – Start the programme again. The stopcock is closed. The water inlet filter is blocked. Open the stopcock fully. Before rectifying the problem you must: – Press the "Start/Stop" button for at least one second.
Problem solving guide Problem Possible cause Remedy Before rectifying the problem you must: – Press the "Start/Stop" button for at least one second. The "Drain" indicator light is flashing and the programme has stopped. All the programme button indicator lights will light up. – Switch the dishwasher off using the "On/Off" button. The filter combination in the wash cabinet is clogged. The drain pump or non-return valve may be blocked. Clean the filter combination, see "Cleaning and Care".
Problem solving guide Problem Possible cause Remedy Three horizontal bars - - There may be a technical – Press the "Start/Stop" -show in the time disfault. button for at least one play at the end of the second. programme: All the programme button indicator lights will light up. – Switch the dishwasher off using the "On/Off" button. After a few seconds: – Switch the dishwasher on using the "On/Off" button. – Start the programme again. – Press the "Start/Stop" button to start the programme.
Problem solving guide Problem Possible cause Knocking noise in the wash cabinet The spray arm is knocking Interrupt the programme, against an item in the bas- rearrange items which are ket. obstructing the spray arm. Rattling noise Items of crockery are insecure in the wash cabinet. This may be caused by the on-site installation or the cross-section of the piping. Knocking noise in the water pipes Remedy Interrupt the programme, rearrange the items of crockery.
Problem solving guide Problem Possible cause The dishes are not clean The dishes were not loaded correctly. Dishes were placed inside other pieces, water could not access all surfaces. The outlet of the water intake pipe for the middle spray arm was covered. An insufficient amount of water flowed into the middle spray arm. The programme was not powerful enough. Not enough detergent was dispensed. Remedy See notes in "Loading the dishwasher".
Problem solving guide Problem Possible cause Remedy The rinse aid amount may Increase the dosage or be insufficient or the rinse replenish the reservoir, aid reservoir empty. see "Before using for the first time". Crockery was taken out of Leave it in for longer, see the cabinet too soon. "Operating the dishwasher". White residue is visible Not enough rinse aid was Increase the dosage, see on cutlery and crockery, used. "Before using for the first time".
Problem solving guide Problem Possible cause Remedy Glassware is dull and Glassware is not discoloured; film can- dishwasherproof. The surnot be wiped off faces are affected. There is no remedy. Purchase glassware which is dishwasher-proof. The wash temperature of the selected programme was too low. The bleaching effect of the detergent used is too low. Select a programme with a higher wash temperature. The salt reservoir cap has not been screwed on correctly.
Problem solving guide Problem Possible cause Detergent residue is left The dispenser was still in the dispenser at the damp when detergent end of a programme was added. Remedy Make sure the dispenser is dry before adding detergent. The detergent lid cannot Clogged detergent resiRemove the residue. be closed properly. due is blocking the catch. Before rectifying the problem you must: Water remains in the wash cabinet at the end of a programme – Press the "Start/Stop" button for at least one second.
Solving problems Cleaning the water inlet filter A filter is incorporated in the screw connection of the valve on the water inlet hose. The filter must be cleaned when dirty, otherwise insufficient water flows into the wash cabinet. ,The plastic housing of the water connection contains an electrical component. It must not be dipped in water.
Solving problems Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Watch out for glass or bone splinters which could cause injury. ^ Take the filter combination out of the wash cabinet (see "Cleaning and care", "Cleaning the filters in the wash cabinet"). ^ Scoop the water out of the cabinet using a suitable container.
Solving problems ^ Lift up the non-return valve and rinse well under running water. The drain pump is situated under the non-return valve (see arrow). ^ Remove all foreign objects from the non-return valve. ^ Remove all foreign objects from the drain pump (watch out for glass or bone splinters which are particularly difficult to detect and could cause injury). Turn the drain pump impeller by hand to check that there are no more obstructions.
After sales service Should you still have any difficulties, please contact: – Your Miele Dealer or – The Miele Service Department (see back cover for address). Programme update function - PC The programme update function (PC = Programme correction) is designed to enable a service technician to update your machine’s electronics in keeping with advances in technology. ^ Please quote the model type and number of your appliance. This information is given on the data plate at the top of the door.
Optional accessories To make the most of your dishwasher If you would like … you will need to order … ... to wash bottles, e. g. milk or baby bottles …. a bottle holder ... to wash a lot of glasses …. a glassware insert for the bottom basket …. to wash long-stemmed glassware … . a glassware insert for the upper basket ... to wash large plates ... an insert for plates up to 32 cm diameter …. to wash additional items of cutlery ….
Comparison tests Test standard: EN 50242 / IEC 704 Standard programme for comparison tests (energy label): Economy Note: The Universal Plus 55 ° programme for normal soiling has increased wash and drying results with shorter running times and increased energy requirements. Amount washed: 12 place settings Amount of detergent: 30 g only in compartment II. Rinse aid dispensing: Setting 3 (approx.
Comparison tests Cutlery tray 62
Comparison tests Test standard: EN 50242 / IEC 704 Standard programme for comparison tests (energy label): Economy with additional function "Top Solo" Note: The Universal Plus 55 ° programme with additional function "Top Solo" for normal soiling has increased wash and drying results with shorter running times and increased energy requirements. Part load: 6 place settings Amount of detergent: 20 g only in compartment II. Rinse aid dispensing: Setting 3 (approx.
Transport Should you ever need to move the dishwasher, e.g. when moving house, note the following: – Empty the dishwasher, – Secure any loose parts, e. g. hoses, mains cable, cutlery baskets, lower basket – Transport the dishwasher in the upright position. If unavoidable, it may be transported on its back. Do not transport it on its side or on the door as residual water still in the appliance will leak out of it. This residual water could get into the electronic unit and cause a fault.
Technical data Height freestanding 85 cm (adjustable +4.0 cm) Height built-in 81.7 cm (adjustable +5.0 cm) Height of building in recess 82 cm (+ 5.0 cm) Width 59.8 cm Width of building in recess 60 cm Depth: Freestanding Built-in 60 cm 57 cm Depth with door open Freestanding Built in 118.5 cm 115.5 cm Weight: Freestanding SC# Integrated SC# approx. 65.5 kg approx.
Programme chart Programme When to use Detergent Compartment II (Wash cycle) Intensive 75 ° 2) for normally soiled pots, pans, dishes etc with dried on soiling; for very heavy soiling, add 20% more detergent to compartment I 100 % Universal Plus 65 ° 2) for heavily soiled crockery with dried on soiling containing starch 100 % Universal Plus 55 ° with a longer wash time for normally soiled crockery with dried on soiling 100 % Universal 55 ° 2) for normal everyday loads 100 % Normal 50 ° 2) wi
Programme chart Programme sequence Consumption Energy Hot Cold water water conconnection nection (15 °C) (55 °C) Water h:min 3) Litres Hot Cold water water conconnection nection (15 °C) (55 °C) Main wash Interim rinse 1 2 Final rinse Drying X 75 ° X X 75 ° X 1.7 1.2 13 2:15 1:57 X X 65 ° X X 65 ° X 1.5 0.7 17 1:55 1:38 X X 55 ° X X 65 ° X 1.25 0.7 17 1:50 1:32 X 55 ° X X 65 ° X 1.2 0.6 13 1:25 1:07 X 50 ° X X 65 ° X 1.2 0.
Alteration rights reserved/ (G698 Plus) / 000 This paper consists of cellulose which has been bleached without the use of chlorine.
