User manual

Options
59
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
 Open the door if you need to check
how long the timer has left to run.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10hours,
and in minutes for durations below this.
At the end of the delay period, the pro-
gramme selected begins automatically.
The time left will appear in the display
and theTimer indicator light will go
out.
How the time for the timer is shown
in the display:
Up to 59minutes:
e.g. 30minutes=:
1hour up to 9hours 30minutes:
e.g. 5hours=:
Over 10hours:
e.g. 15hours=
Starting a programme before the
time for the timer has elapsed:
A programme can be started before the
time for the timer has elapsed.
Proceed as follows:
 Open the door.
 Switch the dishwasher off with the
button.
 Switch the dishwasher on again with
the button.
 Select the programme you want.
 Start the programme by closing the
door.
The optical in-operation indicator light
comes on to show that a programme
sequence has been started.