Operating instructions

The door can only be opened if:
–
the electricity supply to the machine
is switched on,
–
the red (emergency cut out) master
switch is in the I-ON position,
–
the I-0 On-Off button is pressed in
and
–
a cleaning or disinfection programme
is not in progress.
The door on the clean side (G 7826)
can only be opened if:
– DESIN (disinfection) programmes
have been correctly completed,
or
– the door locking function is active
(see "Machine function/Door locking"
in the Programming Manual).
To open the door
^
Press the 5 door button, and holding
onto the door grip open the door.
,
Do not touch the heating
elements under the wide area filter
during or directly after the end of a
programme. You could burn
yourself. They remain hot for some
time after the programme has
finished.
If the boiler has been programmed
to BOILER READY, be particularly
careful of hot water and steam when
opening the door. Danger of burning
or scalding. The inlet to the wash
cabinet is located, as viewed from
the unclean side, underneath the
basket runner on the left hand side.
To close the door
^ Lift the door upwards and push until
it clicks shut.
Opening and closing the door
16