Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
^
Set the programme place coding.
^
Put the magnetic strip back in the
track.
The magnetic strip must be placed
in the track such that the Bit coding
set out in the chart is visible through
the round windows in the track.
^
Place the track in the holder in the
mobile unit and screw firmly in place.
Bit 6 (WAK) is not a component part
of the modifiable magnetic strip.
Make sure that you code mobile
units with side connection with a
track where Bit 6 is set to I.
Mobile units without side coupling
must be coded with a track without
Bit 6.
The magnetic strips on G 7823 /
G 7824 / G 7825 / G 7826 must have
grey magnets.
The magnetic strips on G 7827 /
G 7828 must have black magnets.
Automatic mobile unit recognition (Optional)
20