Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Loading the machine
–
Arrange the load so that water can
access all surfaces. This ensures
that it gets properly cleaned.
–
Do not place items to be cleaned
inside other pieces where they may
be concealed.
–
Hollow instruments must be
thoroughly cleaned, internally and
externally.
–
Please check that instruments with
long narrow hollow sections can be
flushed through properly before
placing them in inserts or connecting
them to jets.
– Hollow vessels should be inverted
and placed in the correct mobile
units, modules and inserts to ensure
that water can flow in and out of
them unrestricted.
A cover net can be used to reduce
the risk of glass breakage during the
wash process.
–
Lightweight items should be secured
with a cover net (e.g. an A 2) and
small items placed in a mesh tray to
prevent them blocking the spray
arms or being attracted by the
magnetic strip on the automatic
mobile unit recognition system.
–
Deep-sided items should be placed
at an angle to make sure water runs
off them freely.
–
Tall, narrow pieces should be placed
in the centre of the baskets. This
ensures good water coverage.
–
Mobile units with an adapter must
engage correctly.
–
Modules must be correctly
connected in the mobile unit.
–
The spray arms must not be blocked
by items which are too tall or which
hang down in their path. If in doubt,
test for free movement by manually
rotating the spray arms.
–
It is advisable to use only instruments
made of special application steel
which are not susceptible to
corrosion.
– Instruments which cannot withstand
high temperatures should be
chemically disinfected.
,
Disposable instruments must not
be put into the machine for
processing.
Preparing the load
Empty all containers before loading into
the machine (paying particular attention
to regulations regarding infectious
diseases and epidemics).
,
Ensure that acids and residual
solvents, especially hydrochloric
acid or chlorides, cannot get into the
wash cabinet.
Unloading instruments
Instruments should be unloaded dry
ready for further processing.
Areas of application
22