Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Transfer trolley for loading and
unloading the machine
,
When a disinfection process is
being carried out according to
nationally laid down hygiene
standards (e.g. § 18 IfSG), the
contaminated surfaces of the trolley
must be disinfected, after the
machine has been loaded, using a
spray disinfectant in accordance
with national health and safety
regulations and § 18 IfSG.
Disinfecting agents listed on DGHM
(German institute for microbiology
and hygiene) are also suitable.
The height of the transfer trolley can be
adjusted using the feet.
The height should be set so that the
open machine door is held underneath
the side catches on the transfer trolley.
If the machine is not fitted on a plinth
the position of the foot pedal on the
transfer trolley may need to be
changed.
^
Unscrew foot pedal a.
^ Loosen counter nut b on adjusting
screw c.
^ Screw adjusting screw c further into
the foot pedal, so that the stopping
point is reached earlier.
^ Re-secure the adjusting screw.
^ Screw the foot pedal back on.
Areas of application
28