Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Venting the dispensing system
Before the washer-disinfector is first
commissioned, and later on if one or
more containers has been allowed to
run dry, the dispensing system(s) for
liquid media will need to be vented. To
do this:
^
Press the I-0 button.
^
Select operating level B.
^
Select as required:
Programme DOS1-FILL
Programme DOS2-FILL
Programme DOS3-FILL
Programme DOS4-FILL.
(See "Operation/B. Free programme
selection).
^ Press the Start button 6.
The DOS-FILL Service Programmes
are allocated to programme places
58-61 ex works, but can be
re-allocated to other programme
places, if preferred.
Dispensing system
maintenance
To ensure trouble-free operation, the
following regular maintenance should
be carried out by a Miele approved
service technician.
Every 12-18 months
Replace the hoses in the dispensing
system(s).
External Dispensing systems
If external pumps are to be used for
dispensing liquid agents, please inform
the Miele Service Department. The
instructions given in the Programming
Manual under "Machine functions" will
need to be observed.
Dispensing liquid chemical agents
33