Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Starting a programme
See the Programme charts in the
Programming Manual supplied with
the machine for detailed information
and important notes on the standard
Miele programmes.
A. Fixed programme
Set up fixed programme(s) once in
operating levels B or D and for free
access in operating level A (see
"System functions, Programmes under
A free access" in the Programming
Manual).
^ Select operating level A.
^ Check in the display that the
programme shown is the one
required.
If several fixed programmes have
been made freely accessible, select
the one required using the
programme selector.
^
Press the Start button 6.
B. Free programme selection
^
Select operating level B.
In operating level B there are three
ways of selecting a programme.
1. Programme places 1 - 23 can be
selected using the Programme selector.
^
Turn the programme selector to the
required programme.
The programme name will appear in
the display.
2. Programmes above place 24 are
selected using the 4 and 3 keys.
^
Turn the programme selector to 24.
^
Press 4 (scrolls forwards) until the
required programme is shown.
^
Press 3 (scrolls back) until the
required programme is shown.
3. The PROGRAMME SURVEY menu
lists all stored programmes. A
programme can be selected from this
menu.
To do so:
^ Select Programme Survey with 1
and confirm with 6.
^ Select a programme using 1 or 2.
^ Press 6 to confirm selection.
This exits the Programme Survey, and
the selected programme is shown in
the display.
After selecting one of the three options
above:
^
Press the start button 6. The
programme proceeds.
For further information on programme
selection see "Operating Level B" in the
Programming Manual.
Operation
35