Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
C. AWK – Automatic mobile unit
recognition
^
Select operating level C.
^
Push the coded mobile unit into
place.
,
Make sure that there are no
small metallic objects or instrument
parts attracted to the magnetic strip,
in particular to the underside of it.
Any metallic objects on the strip can
result in the coding being incorrectly
read.
^ Close the door.
,
Before starting a programme it is
absolutely essential to check that
the programme shown in the display
is the correct on for the mobile unit
being used.
Otherwise inadequate cleaning or
disinfection could be the result.
Please make sure, that the places
assigned for the programmes using
Automatic mobile unit recognition
are not changed around arbitrarily.
^
Press the Start button 6.
When processing medical devices,
any changes made to programmes
or dispensing systems must be
documented in a log book kept with
the machine (in accordance with the
Medical Devices directive
93/42/EWG). The machine's
cleaning and disinfecting standards
must also be re-validated.
Programme sequence
The programme will start automatically
as soon as the Start button has been
pressed. It is finished when
PROGRAMME-END appears in the
display and the background lighting
flashes (press any button to switch off
the flashing lights).
See "System functions" in the
Programming Manual for further
information on switching off the flashing
signal.
Detailed information on programme
sequences is given in the appendix
of the Programming Manual.
The display background lighting
goes out automatically after approx.
15 mins. To bring it back on again
press one of the buttons.
,
On machines with a built-in
printer you must not change the
colour ribbon cartridge or the paper
roll whilst a programme is in
progress.
Operation
36